Primitive Archer
Main Discussion Area => Flintknapping => Topic started by: 1442 on January 21, 2017, 12:00:42 pm
-
Made this first one from a TX tab while I wuz waiting for some glue to dry on something else that aint a broke point.
-
Got a cool flake here
-
here's the finished point
-
This is the other point.
I made a antler indirect tool and made the preform with it from a Georgetown flake.
Pressure flaked it with antler and started the notches with antler but didn't get too far before I had to get the copper flaker out and restart the notches after stalling them out close to the edge with the antler.
I just starting to use antler, and I like it very much, I get the edges to strong and don't know the set up angles needed yet but
Antler is awesome to knap with
-
two more of finished point
-
Very nice looking points.
-
Way to go. Like the antler/bamboo precision set up
Knapper
-
Those are very nice.
-
Damn! you must be bored or unemployed! >:D
-
Thanks
But...no I got to work.
For some reason I feel like I could use more sleep though.
Here's another one I made with the antler stick
-
more pics
-
and more pics
-
and finally, the finished point.
Then no more pics for now
-
Wow! Your a machine!