Primitive Archer
Main Discussion Area => Around the Campfire => Topic started by: JoJoDapyro on September 12, 2016, 10:27:21 am
-
I am going to build a new workbench for the shop. I currently have 2 shave horses, 2 saw horses and one small table in my shop. the problem with this is that my tools all congregate on my table, Band saw, table saw, and saw horses. I am planning on a 30 inch wide workbench, that I can mount my "portable" table saw into. What else should I incorporate into it? I wouldn't mind some bench dogs, and a removable "Sacrificial" area for drilling. Thanks for your ideas.
-
I make all my bench tops with 2x4's or 2x6', whatever I have available. I like it because you can drill into, easily bolt or screw down any tools like my mini lathe and scroll saw. When a board gets too many holes in it, you just replace a board, instead of cutting a whole new sheet of plywood to fit.
Tattoo Dave
-
You should checkout Paul Sellars on youtube, he has a series on how to build a nice solid workbench. He has a blog as well detailing the how-to and different options as far as vices and holdfasts as well. It's not your typical thrown together bench but is a common man approach and price with durability and longevity also.
-
A Man needs a good work bench, I have lots of bench space ,tools still congregate on them. ::) ;) :)
Pappy
-
When a board gets too many holes in it, you just replace a board, instead of cutting a whole new sheet of plywood to fit.
Tattoo Dave
Do you run them with the 1 3/4 on the top, or the wide side?
You should checkout Paul Sellars on youtube, he has a series on how to build a nice solid workbench. He has a blog as well detailing the how-to and different options as far as vices and holdfasts as well.
Sounds like something I can do at work! >:D
A Man needs a good work bench, I have lots of bench space ,tools still congregate on them. ::) ;) :)
Pappy
I don't mind the tools on the table, band saw or table saw, but moving them from the tables to the shave horses, back to the tables gets old.
-
Hedgeapple has a very nice workbench in his shop. It has an extended part in the middle that his vise is mounted on. If I ever get to build a bigger shop I'm going to incorporate this into a workbench.
(http://i666.photobucket.com/albums/vv22/Outlawstaves/20160319_184537_zpspqhrizej.jpg)
(http://i141.photobucket.com/albums/r55/clintanders/Snapbucket/C37BF852.jpg)
-
I like that vice extension, I'm going to steal that idea :) :) :)
-
I like that vice extension, I'm going to steal that idea :) :) :)
I agree, it looks like it would be awesome. But I'll make mine removeable.
-
glad to see there is room on the work bench for a bottle of cure all ;)
-
glad to see there is room on the work bench for a bottle of cure all ;)
Good Eye!
-
There's a lot more than one bottle on that bench ;)