Primitive Archer
Main Discussion Area => Bows => Topic started by: Lucasade on September 05, 2016, 02:34:56 am
-
Sorry to post this again - my original question in the other thread seems to have got lost in a discussion as to whether the tree I cut the stave from actually grows where I live >:D
My laburnum stave has dried into fairly extreme reflex as I didn't know to strap it down when I split it, which I'm not sure my tillering skills are up to handling even with the help of tutorials that I have seen posted here. Are there any design tricks I could use to help me such as putting some deflex in to the handle, or do I just need to grow a pair and get on with it?
(http://i1266.photobucket.com/albums/jj535/lucasade2/image_zpswytqye0r.jpeg)
-
If it were me I'd keep the reflex, but as you said a deflexed steam bend in the handle would work too
-
Personally, I would deflex the handle to the point of leaving the tips 1.5 inches above the back of the bow. After being shot in, the tips will be flat with the back. Good string tension, not over stressed, and nice draw feel.
-
Have you seen the build along that Gordon did with a highly reflexed vine maple stave? It's a good one, worth a look.
I have a buckthorn stave that dried into about 4 1/2" of reflex that I hope to tackle this fall.
http://www.primitivearcher.com/smf/index.php/topic,53195.0.html
-
Have you seen the build along that Gordon did with a highly reflexed vine maple stave? It's a good one, worth a look.
I have a buckthorn stave that dried into about 4 1/2" of reflex that I hope to tackle this fall.
http://www.primitivearcher.com/smf/index.php/topic,53195.0.html
Gordon's build along was the one I was referring to - I think I'll be studying it very closely.
-
I'm thinking that I'll see how manageable it is when I put it on the long string. If it's too much of a problem, I'll steam the handle and move it forward an inch or so.
Good luck with yours!
-
That sounds like a good way to go - thanks!