Primitive Archer

Main Discussion Area => Bows => Topic started by: Justin.schmidt23 on August 19, 2016, 02:40:01 am

Title: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 02:40:01 am
Well after rushing and destroying 5 or 6 staves Ive finally realized how to properly use a draw knife  :-[
Hackberry 64in TTT 2in fades to 1/2 in non bending 5in tips. It's obviously VERY rough but any advice would be great thanks!
(https://s4.postimg.org/fxmy67l49/20160819_015757.jpg) (https://postimg.org/image/fxmy67l49/)
Here's a pretty decent sized knot but hopefully I'll be fine
(https://s3.postimg.org/83nyba1kv/20160819_015802.jpg) (https://postimg.org/image/83nyba1kv/)
And just cause I love the way hackberry looks
(https://s4.postimg.org/xkyqmzszd/20160819_015816.jpg) (https://postimg.org/image/xkyqmzszd/)
Title: Re: How's she lookin?
Post by: PEARL DRUMS on August 19, 2016, 10:14:57 am
Looks like you have along ways to go :)

Keep it up and you will get a good bow.
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 12:50:55 pm
Haha oh yeah it's still a good 2 in thick
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 01:09:47 pm
Think it's possible to induce reflex even though that knot is on the side?
Title: Re: How's she lookin?
Post by: PEARL DRUMS on August 19, 2016, 01:29:17 pm
Sure. Hackberry bends like rubber with dry heat. Just take it easy and watch how that knot acts as you clamp it down. Is that just above/below the centerline?
Title: Re: How's she lookin?
Post by: mullet on August 19, 2016, 01:52:05 pm
I wouldn't put a heat gun to it till it drys. What, it's only a few weeks without roots attached, right?
Title: Re: How's she lookin?
Post by: PEARL DRUMS on August 19, 2016, 01:56:09 pm
Good call. I didn't that. Wet wood and heat guns equal lots and lots of checks.
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 03:47:14 pm
I planned on letting it dry. This is actually a newly cut sapling  lol.  I cut ANOTHER tree down. This one is about 12 ft tall 6-8 in in diameter.
Title: Re: How's she lookin?
Post by: mullet on August 19, 2016, 07:39:23 pm
Awww, Gawd, another Clear Cut in Fl. :o ;)
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 07:40:50 pm
Hey man do what you gotta do
 Definitely cheaper than buying some!
Title: Re: How's she lookin?
Post by: mullet on August 19, 2016, 09:30:53 pm
You could probably trade some of those staves in the future for some cured ones.
Title: Re: How's she lookin?
Post by: PeteC on August 19, 2016, 10:47:39 pm
If it's still green,cut out a form out of a 2X6 and clamp it down for a month. Your reflex will be "dried" into the stave . After it's dry,take it to floor tiller,then heat treat the belly.Give it a few days to equalize with the RH,then finish your tiller. JMHO   God Bless
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 11:41:49 pm
If it's still green,cut out a form out of a 2X6 and clamp it down for a month. Your reflex will be "dried" into the stave . After it's dry,take it to floor tiller,then heat treat the belly.Give it a few days to equalize with the RH,then finish your tiller. JMHO   God Bless

Wow that's an awesome idea I'll definitely be trying this out
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 19, 2016, 11:50:24 pm
You could probably trade some of those staves in the future for some cured ones.

True. I still need to come grab that elm from you.  I might try trading a few for some horn and rawhide
Title: Re: How's she lookin?
Post by: DuBois on August 20, 2016, 12:54:40 am
Looks like you have along ways to go :)

Keep it up and you will get a good bow.
1+
Title: Re: How's she lookin?
Post by: mullet on August 20, 2016, 09:36:53 am
You could probably trade some of those staves in the future for some cured ones.

True. I still need to come grab that elm from you.  I might try trading a few for some horn and rawhide

I leave next Sunday.
Title: Re: How's she lookin?
Post by: Justin.schmidt23 on August 20, 2016, 01:05:49 pm
Well I'll have to wait till you get back lol