Primitive Archer
Main Discussion Area => Bows => Topic started by: H.P. on March 29, 2016, 02:46:28 pm
-
New to the forum, but long time traditional archer (never even fired a bow w/wheels before). Anyways, I'm getting the selfbow bug and not sure where to start. I think I've dried my eyeballs out looking at different kinds of staves, woods, kits, etc. I've also looked around my local area for woods that might be appropriate for bow making as well.
I'm not a spring chicken and have worked with wood, bone, horn, and know my way around an adz and draw knife. Haven't attempted a bow yet (but own many).
So, I guess my question is: is there a type of wood I should begin my bow making journey with? Should I start with a stave or order a roughed out blank? My apologies for the broad questions.
Advice appreciated,
Harris
-
Welcome HP. I would recommend Osage stave
-
You should start with a hickory stave or a red oak board. My site has info.
Jawge
http://traditionalarchery101.com/
-
HP, if you have access to good lumber hickory, hard maple or red or white oak is the easiest, cheapest way to go. George Tsoukalas' web site is linked below with lots of info about how to pics the proper bow through the whole process of building a board bow.
Come back on here with pics and questions and we'll guide you along. Once you learn how to tiller properly you can use any board or stave using the same info.
http://traditionalarchery101.com/archer.html
-
Hickory is very forgiving for a first bow, and does not require you to learn ring chasing right away as Osage would. I've seen a fair number of new guys get frustrated with that and go back to F#&*#glass bows right away.
I don't think you mentioned where you are located. If you let us know, someone on here is likely close by - or will at least know what woods might be cheaply or readily available in your area.
OneBow
-
Hi H P welcome I 2nd hickory got my first successful bow out of hickory ,also 2nd Georgie's site & a book called The bent stick by Paul Comstock ,My 2 cents is to start with a $6 board instead of $60 stave to start , Welcome to the addiction !
-
you can see our opinions abound,, you will just have to pick one and go with that,,all above advice is a good starting point,, :)
-
When I started I worked with the wood I had in my area - that was ash and hackberry. If you want to purchase wood to make a bow I would go with a hickory board bow or stave. There are also lots of opportunities to go to a "bow jam" depending on where you live. Can learn a lot at these and reduce the learning curve a bit by attending. Good luck and enjoy!
-
Something like this your going to hear a lot of mixed approaches. If you've got the self bow bug. Then make a self bow. I would recommend hitting up the trading post and make an offer (no money) for a good stave.
Then head over to the 'How to' section and pick out a self bow build a long:)
Good luck! And welcome!
-Bryce
-
If you can afford it I would purchase a good seasoned osage stave and a copy of tbb#1. Exercise a lot of patience. There is no reason why you can not get a very good bow from your first attempt. Any of the other options are good also.
-
Hello HP I'm new too not going to give a lot of advice just encouragement. many other with better advice than me. Just try to learn as much as you can and start working that draw knife. If you break a bow its all good just figure out why and start another. Take your time its more than just carving something that looks like a bow. Preparing back of bow and tiler very important. Good luck and have fun when you do shoot that bow you made it will all be worth it :)
-
I started with the bowyer bibles, this site, and Google.
I know board bows are a good learning tool, but boards never interested me.
Where do you live? Learn your local woods and start cutting.
When I first started I bought my first 4 or 5 staves off eBay,
-
His profile says Corpus Christi. There's a couple or three PA members down there I think.
-
Welcome to PA H.P.
There are several other bowyers here in Texas, we try and get together every now and then.
Send me a PM and I'll keep you in the loop.
What kind of hardwoods do you have access to down there?
Cheers
Thunder
-
I say Hickory stave first then Osage second.
I personally wouldn't bother with a board bow unless I intended to back it with somthing.
-
Hickory or white oak stave - very forgiving materials... Osage is best, but chasing rings is a learned skill that takes some time. Picking out a good red oak board was tough for me, when I was making my first ones. Initial success in making a shooting, functioning bow should be your goal right now. Staves were easier for me and Jawge's site got me started and will be a good resource for you. I don't remember ever breaking a hickory or white oak stave bow. If you mess up, it may end up with lots of set, but I doubt it would break. Lots of good advice above. Just get started and have fun with it.
-
welcome PA
chuck
-
thanks for all the responses and I'll shoot you a PM Thunder. I'm still keeping my eyes peeled for Osage closer to my river property that's a little further north of Corpus Christi. No luck yet. However, there's a couple of old timers near my place that I haven't had a chance to pick their brains just yet. They told me where all the good fishing spots were, so they might be able to tell me where to find some Osage growing as well. Ya never know. H
-
White elm is also. A great starter wood.never tried any other of the elms.