Primitive Archer
Main Discussion Area => Bows => Topic started by: Msturm on February 11, 2016, 09:50:35 pm
-
I was asked to make a bow for a friend. I decided to keep cost down because I am giving it away, so I went with red oak from the hardware store a couple blocks from my apt. I think it turned out pretty good, although I have noticed one design flaw. Specs: 1.75 at the fades strait taper to just under.5 at the tips. Reasonably flat belly with rounded edges. Stiff in the handle. Keawe wood tip overlays.
I have put about 80 arrows through it so far. It measures between 44 and 48 lbs at 28in. 62in nock to nock. It has taken some set and I am assuming that is a design flaw. It shoots very well and without the hand shock of my other self bows/board bows. I am loving this thing. The finish is Vinegaroon dye/stain with spar-urethane over it. I hope my buddy likes it.
(http://i.imgur.com/lbJ5n9y.png)(http://i.imgur.com/6yqEOHg.png)(http://i.imgur.com/XDsX28z.png)(http://i.imgur.com/P1WrRzp.png)(http://i.imgur.com/jfqYV6K.png)
(http://i.imgur.com/X6fFc98.png)
And the Money Shot. (had to take a still from a video hence the poor quality photo.) (http://i.imgur.com/JkXdA4a.png)
-
That's a pretty good bend there. I'm sure your friend will be happy as can be. Red oak is a decent bow wood, but not the greatest, I wouldn't be to worried about that little bit of set. I like to stain job, color looks good!
Tattoo Dave
-
Really nice bow Msturm. Shows what a board bow can be.
-
I am betting he likes it! Looks like a fine bending bow to me. Nice work!
-
I think that bow looks great. it seems to me that you've done really well to hold onto that unbraced side profile with a 48# 62" ROBB! :)
-
Nice work on that red oak bow, the tiller looks excellent. Your friend should be pleased to have that bow to shoot.
-
I like it....I dont remember who but someone said the most accurate bows will take a little set.
-
That's a beauty! Jawge
-
Nice man!! Really like that stain
-
Tiller looks great.
-
I know some may disagree but I still a big fan of board bows. Especially this one, good job!
-
He should be happy.That's a nice bow.
-
Its taken a little set. But so has every bow I have ever built. Man I got to say, thats about one of the absolute nicest red oak bows i have ever seen. Mighty fine craftsmanship as well. Ya done good. Welcome to the forum and please, keep posting them bows.
-
Very nice! Doesn't look like much set to me.
-
Well thank you all very much. Being fairly new here I appreciate all the kindness. While I have been lurking on this site and Trad Gang digging through build alongs and talking with people much more experienced than myself, I have not made very many bows. This is number 4 I believe,(2backed and 2 self bows) so the encouragement is helpful! I am developing an addiction..
I appreciate all the kind words. I will keep posting them as they get built!
Sturm
-
Niice
I like it....I dont remember who but someone said the most accurate bows will take a little set.
Howard Hill?