Primitive Archer
Main Discussion Area => Bows => Topic started by: Carson (CMB) on November 16, 2015, 12:46:48 pm
-
The best light for finish scraping and sanding is natural sun light, but this time of year, that sun often sets before I am ready to call it a day. The shops I work in have fluorescent lighting, which doesn't allow me to see the detail very well when finish sanding. Well last night, being frustrated that the sun went down again, a tiny light came on in my head..."turn off the flourescent lights and use the incandescent heat lamp for directional light"
This worked out very well and really set the mood for some intimate sanding time...just me and yew. ;D
I thought I wood share this little personal lighting revelation. I have seen others recommend this for chasing osage rings, and that is probably what gave me the idea for using it in finish sanding. It also makes great light for some photos. I didn't think to take a picture of the light set-up, but it is just a heat lamp shining down at the work at a lowish angle.
Also be cautious when sanding yew indoors. I cracked the door and turned on the exhaust fan to get a little cross breeze and keep the dust out of the old airbags.
One last tip (I started keeping better bow building notes and writing tips to myself so I don't have to relearn them each time I finish a bow...So I am full of tips right now :D): time spent finish scraping with a nicely edged scraper is time saved sanding.
(http://i1119.photobucket.com/albums/k633/Acer_circinatum/IMG_8159_zpsnlnsb9c0.jpg) (http://s1119.photobucket.com/user/Acer_circinatum/media/IMG_8159_zpsnlnsb9c0.jpg.html)
(http://i1119.photobucket.com/albums/k633/Acer_circinatum/IMG_8157_zps1clbphxp.jpg) (http://s1119.photobucket.com/user/Acer_circinatum/media/IMG_8157_zps1clbphxp.jpg.html)
(http://i1119.photobucket.com/albums/k633/Acer_circinatum/IMG_8154_zpsamauswp6.jpg) (http://s1119.photobucket.com/user/Acer_circinatum/media/IMG_8154_zpsamauswp6.jpg.html)
-
Nice silky smooth finish, I will never get there I'm allergic to sand paper...... >:D I do all my spray finishing the following day when the dust has settled.
-
Nice tip Carson, my bows are always scraped clean before any sanding. I always seem to miss a tool mark or 2 no matter how much I try
-
Yep.Nice tip.It's a bit of maticulas work finishing and for some people it's not their thing but I feel if your gonna stick that much time into it going the extra is worth it.Catches the eye every time.
-
Yeah, decent lighting makes all the difference, it's not necessarily the brightness either, the angle makes a big difference.
Keeping notes helps, that's how I started my Bowyers Diary, as an aide-memoire for myself.
Del