Primitive Archer
Main Discussion Area => Shooting and Hunting => Topic started by: huntertrapper on January 30, 2008, 09:20:02 pm
-
As some have seen my post from earlier i have the 50 year old longbows. the one is a 55 pounder. The other is a 45 pounder. The 45 had a string. anyway, i have 2 ?'s
Can the string shrink at all over the years, its just a regular string you'd buy at the store, (not sinew or rawhide)? Also the string is about 5 inches short of the string nock, is that too short or not? should i get another shorter string? Thanks for any help that you guys can give me. Hold on, another question. The handles pulled apart there was just one piece glued on to the whole bow itself. The one i glue, rapped tight with artificial sinew and sewed a tight handle too. will this work for a whille? What would be best to keep the handle set for good? thanks
-
Sand or scrape off all of the Old Glue from both pieces....use Titebond2 ...or Titebond Hide Glue on both pieces....and c-clamp them back together, but make sure that you put something between the c=clamps and the handle and Bow Back....to keep from damaging the Wood....like a piece of leather...or thin wood....then once this has set...then you can make a new Leather Handle.....but remember these Bows are as old as Me....so be gentle...and let them remember that they are Bows not just a Piece of wood thats been hanging around a Closet for decades
-
thanks that pretty much what i did. and trust me im babying them. they are the only bows i can use if i dont get a good bow made for archery. and i dont want to have to resort buying a bow. thanks again yankee
-
I would probably get a longer string to start with or take that one off and hang it by the loop
with a weight alb.or 2 for a while and let it stretch back out.most are 3 4 in. shorter than the bow when unstrung.You can get the brace set after you work it back in some. :)
Pappy