Primitive Archer
Main Discussion Area => Bows => Topic started by: Dh88 on September 16, 2014, 12:37:45 am
-
My uncle just bought a new 21' center console boat so we will be doing a bunch of saltwager fishing soon, so can and will shark skin make a good backing?
-
Shark skin might be too thick for backing unless maybe from a young shark.
-
U could sand it maybe?
-
Used shark skin for handle/grip on a Selfbow a few years back. It's very durable, but has a scratchy feel. It has a very tactile grain that goes in one direction. It feels a great deal like sandpaper, even after sanding it down.
It's very tough stuff, and might make a good stiff backing, but I was disappointed with the look of it. Ultimately, it turned out grey and unappealing.
To be sure, it's tough-just not something that catches the eye. Good luck!
-
Send me some and il make a quiver :D
-
Its is very thick even on a young shark, im gonna save some and dry it out.it might come in handy for something.
-
They're a pain in the butt to skin! If you find out a quick method let me know.
-
I'm not sure there is an easy way to do it lol
-
all the olive that I've worked with was very oily, almost epe oily, just try and leave it natural
-
I've always wanted to try some too, just haven't had any access to a skin yet. If you pinned it to a piece of ply wood(pins on the edge of the board) you could send strips through a thickness sander(rough outside up), reducing the depth of the nodules.. An application of dye would fix the dull grey natural look if you don't care for its appearance.
Hamish
-
I have heard of it being used as sandpaper. Heard that it would be traded for many miles. Also read that the Japanese used it as a grip on katana's during the fuedal period.
-
Haven't ha any shark skin but have used paddle fish , it to is very oily and a pain to skin .
I just hang them and skin them like you would a hog , I don't worry about how much meat I leave on the skin because on paddle fish it's a red oily meat that tastes bad but the white meat is good .
After I get the skins off I lay them on a flat smooth board and take a sharp knife and clean the skin up , I then use a butter knife and scrape the flesh side using a lot of pressure to break the oil pockets up then wash in a strong solution of dish soap then nail them to a sheet of plywood flesh side out to drie.
The backs usually don't give me a problem but the lower sides and belly containe more oil and may need soaked in denatured alcohol .
-
Hitting the water bright and early in the am.hopefully come back with a pile of fish and some good skins lol
-
A pain in the butt to skin and flesh, very stiff when it dries and not very good looking. I've used it for grips but not much else.
-
I did a Shark skin Rawhide backed hickory bow a few years ago..Got the Hide from Tandy Leather...
(http://i1228.photobucket.com/albums/ee451/HickoryBill/052912_183100.jpg) (http://s1228.photobucket.com/user/HickoryBill/media/052912_183100.jpg.html)
(http://i1228.photobucket.com/albums/ee451/HickoryBill/100MEDIA_IMAG0244_zps79050bc5.jpg) (http://s1228.photobucket.com/user/HickoryBill/media/100MEDIA_IMAG0244_zps79050bc5.jpg.html)