Primitive Archer

Main Discussion Area => Arrows => Topic started by: PK on January 04, 2008, 12:54:05 am

Title: Placing an arrow on a spine tester
Post by: PK on January 04, 2008, 12:54:05 am

should the arrow be placed on the tester supports with the nok and point or on the shaft just in front of the nok and the back of the point?

Title: Re: Placing an arrow on a spine tester
Post by: juniper junkie on January 04, 2008, 01:06:28 am

I usually put mine just in back of the nock and in front of the point, depending on the length of the arrow, otherwise just center in between the supports. the most important thing would be to place the weight in the center of the shaft with the stiffest side of the shaft facing up.

Title: Re: Placing an arrow on a spine tester
Post by: PK on January 04, 2008, 01:48:43 am

Quote from: juniper junkie on January 04, 2008, 01:06:28 am

I usually put mine just in back of the nock and in front of the point, depending on the length of the arrow, otherwise just center in between the supports. the most important thing would be to place the weight in the center of the shaft with the stiffest side of the shaft facing up.

Thanks JJ