Primitive Archer
Main Discussion Area => Bows => Topic started by: Badger on June 25, 2014, 07:02:47 pm
-
I thought this was an interesting bow. Lately I have been playing around more with deflexed bows to see how they performed for me. I had always wanted to try a deflexed handle with tips about even with the back and no extra reflex. I tillered it out to 55#@28 prior to shooting in, I have about 1 dozen arrows through it. What I thought was interesting about the bow was that I didn't loose so much as an ounce or draw weight due to compression on the wood. It called for 20 oz and came in at 24 oz which is a little unusual but the side benefit was that the extra wood was not pushed at all and performs beautiful. It also gives me some options, I think this is one of those times I can tiller it out to 29 or 30 and still keep the bow pristine, I seldom run into this.
-
That's a dandy of a braced profile Steve, not crazy about the handle though but that's just me. How long as the bow?
-
64" mark, I used a 7/16 belly slat with a short 11" power lam and then built up the handle.
-
Looking good !
-
Pull it Steve!
-
If I send you my address how long do you think it will take to arrive? >:D
That thing is awesome!! Let's see the full draw :)
-
Thanks, waiting for my photographer.
-
Steve, I'm curious do you thin the osage belly slat in the handle area to create the deflex there. Never attempted a glue up before myself, this is a good looking bow.
-
Steve, I'm curious do you thin the osage belly slat in the handle area to create the deflex there. Never attempted a glue up before myself, this is a good looking bow.
I just starting doing these deflex bows the last couple of months, I think I have made about 6 now. I do it 3 ways. The first way is to leave the handle 3/4 thick, steam and bend, the second way is to make a tri lam with the center of the pices the thickest and tapering to the tips and my favorite way that I am doing now is to cut the belly slat at about 7/16 thick heat and bend around a form, I use the same form to laminate up a power lam anywhere from 11" to about 16" long. I then glue the power lam to the belly lam in one process getting my deflex and then do the remaining glue up with the back and the handle, this time I did the handle and power lam at the same time and the back last, pushing it into reflex.
-
I draw 29".
Just saying.
-
Nice one, very good job,bet it's a sweet shooter also. I have only done 2 in that design [selfbows] and they are about as smooth as it get when it come to drawing,
early string weight and pretty fast to boot. :)
Pappy
-
Cool bow (yeah that handle stinks >:D ;) ) Well, let me see...
I have some boo...
I have some Osage ;D
Got a couple ofdeflexed bows sort of in the pipeline, it will be interesting weird to go for that sort of braced shape... I might just get lost without the comfort of an arc of a circle :'(
So many bows, so little time... better stop typing and get back to the garage ;D
Del
-
It's all about tradeoffs. I've found such profiles, and even more deflex than that, result in very stable and forgiving bows, which carries weight for me. I've gone both directions... pushing the reflex/recurve envelope, and then turned around and put bunches of deflex in them. When I did, I instantly fell in love with how the deflexed bows handled. I still like to mix it up. The tri-lam I'm making now has both substantial deflex and reflex. Anxious to get it done and shoot it.
-
I tested it out today, loved the way it shot. Not real impressed with the speed but I might make it my go to bow, behaves very well.