Primitive Archer
Main Discussion Area => Bows => Topic started by: Don Case on February 25, 2014, 06:16:27 pm
-
Starting a new thread. Other than collecting in the winter, what would be the keys to keeping the bark on an OS bow. I'm thinking that bow length and draw length would be important. There must be a certain radius that will cause the bark to crack and separate. Like a long bow with a short draw length would keep the bark. I guess the amount of crown would be important. Any thoughts?
-
"must be a certain radius that will cause the bark to crack and separate" Would have to agree on that one but never tried it. I know a few guys glue on Cherry bark for backing but to leave it on totally....................... ??? not sure it will work. Even if it worked for a short draw lenght; you would scarifice performance.
-
The amount of crown does not matter.
For the best results to keep the bark on cut in the coldest part of winter.
If you heat treat too much the bark will crack and break of in some areas.
But other than that, should stay on no problem, hit with steel wool and it makes a wonderful deep brown when finished:)
-
Ocean spray is amazing wood, but the bark is really tough to get off! Leave it on if you don't mind the look. If you don't mind the effort I have used a scraper, but spent lots of time, and lots of work getting it all off. The wood is worth the effort!
Dale
-
Not sure on OS but would suspect after a while it would season,get brittle and crack,I have tried it on small Hickory saplings and it stayed for a while and looked really cool ,but after a year or so it started cracking, I guess you cold try and see.
Only thing if it does crack it could take some of the good back with it.Just guessing here but most wood it won't work. :)
Pappy