Primitive Archer
Main Discussion Area => Bows => Topic started by: catfish john on February 10, 2014, 07:06:14 pm
-
I'm building my first long bow ( at least to me it's long ),, I'm used to 48"or under,,BUT,, this one is 60"long, and it seems REALLY long to me! SO, my question is,,How long will a 60"recurve bow be when it is strung at a 6" brace height?? I'm hoping it will seem much shorter than it does now!
-
Depends how you are actually measuring it unstrung and what sort of curves you are talking about. Still, a 60 inch recurve is about as short as most will go with a self recurve.
-
60 inches is about the shortest I like to go lol
-
Like PatM said, depends on how you measured it. I would think it would measure 2-4" shorter braced.
-
sorry guys,, I should have said, it's going to sinew backed ,, it's a slightly scaled down version of the Gansu bow that was discovered in 1999 in a 5000 year old grave site in China. The original was 63"long and sinew backed with a belly consisting of 5 strips of horn! The main working part of the limb was 3"wide! The syias were quite long , and by most accounts, seemed as though they must have been a little flexible as well. I have done bows with horn bellies,,but I don't like the horn because,,unless the bow is at least 100 pound pull,,I find the horn makes the limbs too slow. SO,, since I don't want a 100 pound bow,, my belly is going to be maple. I will only use for target shooting, so I'm aiming for around 40 - 45 pound pull.
-
since your used to shooting short bows i think you will like something a little longer for target!
-
The Gansu bow appears to only be a wooden model bow rather than a true functioning bow. There is no evidence of horn or sinew on it.
You must be thinking of the Khotan bow.
Your bow is really going to resemble a scaled down Mollegebet with slightly more angled levers. Not really an uncommon bow style on here.
You can see plenty of bows that Blackhawk has made resembling this.
-
Your string wll be about 56 1/2" long if that helps.