Primitive Archer

Main Discussion Area => Bows => Topic started by: Jodocus on August 28, 2013, 08:27:52 am

Title: Skinning snakes
Post by: Jodocus on August 28, 2013, 08:27:52 am
Got two frozen phytons from a firend. How do I skin them? like a rabbit, from tail to head, I suspect?
One of them is wide enough to back two bows, is it possible to do the cut on one side, leaving the belly side intact?

thanks for any advice
Title: Re: Skinning snakes
Post by: Knapper on August 28, 2013, 09:23:33 am
Jodocus ,
      The answer is yes, the belly can make a nice bow backing as well. Normally I remove the head and start on one side were the belly meets the side. Sharp knife all the way to the tail and pull.
Knapper
Title: Re: Skinning snakes
Post by: osage outlaw on August 28, 2013, 10:55:01 am
If the snake is wide enough I'll cut them one row of scales over from the belly scales.  If its not wide enough to get a backing from the belly scales I'll just unzip them right down the center of the belly.  I use scissors.  I get more control with them over a knife.
Title: Re: Skinning snakes
Post by: Polar Bear on August 28, 2013, 11:12:12 am
Killed a copperhead one day and gave it to a friend I was hunting with.  We went to his sisters house and he started skinning it on the tailgate of his truck.  I went into the house and his niece asked where he was.  I said he was skinning a snake.  Her response was, "Is it dead?"  I told her that I hope so or that was going to be one mad snake.
Title: Re: Skinning snakes
Post by: dwardo on August 28, 2013, 01:40:51 pm
Killed a copperhead one day and gave it to a friend I was hunting with.  We went to his sisters house and he started skinning it on the tailgate of his truck.  I went into the house and his niece asked where he was.  I said he was skinning a snake.  Her response was, "Is it dead?"  I told her that I hope so or that was going to be one mad snake.

Brilliant, from the mouths of babes.
Title: Re: Skinning snakes
Post by: Jodocus on August 28, 2013, 07:46:41 pm
Thanks guys, the skins are off. That was pretty ugly, they had a bad smell already :o And labourous, too. The larger one was  about 6 feet, the smaller about 4. The larger one had nice firm skin, pretty thick as well, while the small one had a paper thin fragile skin I unfortunately toreabout a foot below the head.  Both look great. Air dry them now?
Title: Re: Skinning snakes
Post by: Stringman on August 28, 2013, 08:18:09 pm
Use tacks and spread them open on a board. Stretch them a little to open them up but not over much. They should be dry in a day.
Title: Re: Skinning snakes
Post by: Gus on August 28, 2013, 08:39:23 pm
Exactly what Osage Outlaw and Stringman said...

You can however leave the head on and ad it's length to the skin...
Just takes a little extra work...

Use the tall thumb tacks, they work best, so far.

-gus
Title: Re: Skinning snakes
Post by: sleek on August 28, 2013, 08:52:43 pm
Pin the skins up with the meat side facing out or they will rot more. Also, a nice vinegar soak for a day will kill the odor.
Title: Re: Skinning snakes
Post by: Barefoot_Jake on August 28, 2013, 09:06:38 pm
when I tan snakes I put the skins in a jar or tub with denatured alcohol and glycerin 50/50 to cover to snakes and let it sit in that for like 3 days then pin it to a board with wax paper and air dry amount of days for them not to be  wet anymore but very pliable and shiny.
Title: Re: Skinning snakes
Post by: osage outlaw on August 28, 2013, 10:07:00 pm
I tack mine down and air dry them.  That has worked well for me.  I've never had an odor problem or felt the need to add any chemicals.  Once they are dry I'll take them off the board and hang them up to make sure all the moisture is gone before I roll them up and store them away.
Title: Re: Skinning snakes
Post by: 4dog on August 28, 2013, 10:38:38 pm
I tack em and then salt em , not table salt, stock salt only...speeds up drying time for me.
Title: Re: Skinning snakes
Post by: M-P on August 29, 2013, 12:48:27 am
I've heard that glycerine tanned hides will not glue down for backing.   Ron
Title: Re: Skinning snakes
Post by: Lemos on August 29, 2013, 12:58:09 am
I'm a fan of the staple gun myself for tacking them down, quicker. IMHO .
Title: Re: Skinning snakes
Post by: sleek on August 29, 2013, 01:08:35 am
Mp, I have bought hides like that. I washed em good in soapy water and glued em down with no problem.
Title: Re: Skinning snakes
Post by: M-P on August 29, 2013, 02:17:45 am
Mp, I have bought hides like that. I washed em good in soapy water and glued em down with no problem.

Thanks,  Good to know.   Ron
Title: Re: Skinning snakes
Post by: Bryce on August 29, 2013, 03:06:34 am
Peel and stick!

(http://i1251.photobucket.com/albums/hh544/bryceott/null_zpse63a9189.jpg)

(http://i1251.photobucket.com/albums/hh544/bryceott/null_zpsa4141378.jpg)
Title: Re: Skinning snakes
Post by: Jodocus on August 29, 2013, 03:29:08 am
Looks good Bryce, like a matter of seconds. That
phyton skin was very well muscled though, real butchery.
Title: Re: Skinning snakes
Post by: crooketarrow on August 29, 2013, 09:22:35 am
  SKIN FROM THE HEAD DOWN TO TAIL  NOT TAIL TO HEAD.
  I just tie them up with a string by the head. Split them from head to tail down the belly. Pull down with a pair of plyers.
  FLESH GOOD TACK TO A BOARD LET DRY. I tack mine flesh out.
  OR FLESH ROLL UP ZIP-LOC AND FREEZE.
  I don't tan mine. Indains taned there's with pee. I've did this. It works ok like this also. This is surpose to be the best way of taning snake and fish hides.
  I freeze if it'll be a while before I use. But I've tacked and dryed and not use it for over a year. But watch where you store it mice will nipple on the edges.
  I had a black snake hide just let dty like I skined it. It as 7 or 8 years before I pulled it out of the rafters and but it on a ocean spray bow. It was just find.
Title: Re: Skinning snakes
Post by: Gus on August 29, 2013, 06:10:50 pm
Dang Bryce...

That looks like a Nice Checkered Garter Snake...
I think they'd be Awesome on a a Horse Bow...

I've been on the hunt for a Breeding pair of Checkers...
To grow my own skins...   :)

Also been on the hunt for a pair of Eastern Garters.
I plan to keep half the offspring for bows and release the other half to the wild...
Working on this breeding program for several East Texas species...
My first babies should emerge next year...
Great Spirit willing and the Creek don't Rise.

-gus