Primitive Archer

Main Discussion Area => Bows => Topic started by: seminolewind on August 09, 2013, 11:32:04 am

Title: Florida tree ID
Post by: seminolewind on August 09, 2013, 11:32:04 am
Any ideas on this one ?
Title: Re: Florida tree ID
Post by: seminolewind on August 09, 2013, 11:32:32 am
.
Title: Re: Florida tree ID
Post by: seminolewind on August 09, 2013, 11:38:34 am
.
Title: Re: Florida tree ID
Post by: autologus on August 09, 2013, 12:02:05 pm
Chinaberry maybe.  That is what it looks like to me.  Chinaberry is an invasive species in the south.

Grady
Title: Re: Florida tree ID
Post by: PrimitiveTim on August 09, 2013, 12:36:45 pm
I'd have to agree.  Looks a lot like chinaberry.  It's invasive so it's your duty to cut it down  >:D
Title: Re: Florida tree ID
Post by: seminolewind on August 09, 2013, 12:44:57 pm
Hmmmm wonder if this is bow wood. ::)
Title: Re: Florida tree ID
Post by: autologus on August 09, 2013, 01:02:27 pm
From looking at the Wood Database it appears to be adequate bow wood somewhere in the neighborhood of .61 density when seasoned and but it is fairly lightweight and medium hardness.  It is ringed porous and dries with little warpage or checking.  The modulus of rupture and crushing strength looks to be similar to that of Red Elm.

Cut it down and season some and give it a go, you have nothing to lose but a little work and effort.

Grady
Title: Re: Florida tree ID
Post by: seminolewind on August 09, 2013, 01:12:42 pm
From looking at the Wood Database it appears to be adequate bow wood somewhere in the neighborhood of .61 density when seasoned and but it is fairly lightweight and medium hardness.  It is ringed porous and dries with little warpage or checking.  The modulus of rupture and crushing strength looks to be similar to that of Red Elm.

Cut it down and season some and give it a go, you have nothing to lose but a little work and effort.

Grady
Roger that thanks for the detailed response !
Title: Re: Florida tree ID
Post by: Ryan_Gill_HuntPrimitive on August 09, 2013, 01:21:42 pm
yup china berry.  very very fast growing tree, I have cut some staves in the past and found it very light weight and not good bow wood. I have heard rumor that if you get a giant one that has good heart wood, that it makes a decent bow.  might as well give it a try though. I cut a couple, but never used them. after seasoning, one  was so brittle I was able to break it in full sapling, stave form so i cut them up to burn
Title: Re: Florida tree ID
Post by: autologus on August 09, 2013, 01:34:47 pm
Well that is too bad about it being brittle, with it being an invasive species. 

Grady
Title: Re: Florida tree ID
Post by: seminolewind on August 09, 2013, 02:39:36 pm
Im for sure gonna cut that winged Elm down but will probably leave this one be. Thanks guys