Primitive Archer

Main Discussion Area => Bows => Topic started by: pincushin on August 07, 2013, 06:23:54 pm

Title: 2 new bows
Post by: pincushin on August 07, 2013, 06:23:54 pm
one is 62 inch long the other is 56 inch ther both right around 55
Title: Re: 2 new bows
Post by: Blaflair2 on August 07, 2013, 08:41:37 pm
Nice man. I like the shorty
Title: Re: 2 new bows
Post by: Trapper Rob on August 07, 2013, 09:18:28 pm
Very nice.
Title: Re: 2 new bows
Post by: David_Daugherty on August 07, 2013, 09:52:50 pm
Nice bows and of course nice Elk on the wall  :)
Title: Re: 2 new bows
Post by: mikekeswick on August 08, 2013, 04:44:44 am
The top one is bending too much about 6 inch up from the handle and the rest of the limb is stiff.
The shorter bow is better but has a similar problem - still not enough bend in the outers.
I'd recommend for your next bow to make the handle the widest part and then taper in straight lines to the nock width. This will give you a pyramid bow and pyramids should have limbs with even bend all the way along eg. it should look like an arc of a circle.
This will be much easier for you to judge and will give you and evenly strained bow.
Title: Re: 2 new bows
Post by: Joec123able on August 08, 2013, 04:50:50 am
I like em what kinda wood are they ?
Title: Re: 2 new bows
Post by: blackhawk on August 08, 2013, 07:45:59 am
Looks like you've caught the bowyers bug and can't stop making one after the other  >:D  :laugh:   don't stop now  ;) go make another  ;)
Title: Re: 2 new bows
Post by: PEARL DRUMS on August 08, 2013, 07:51:15 am
That's what I was going to say as well. These two are better than the last two. Just think what the next few look like. Take Mikes advice and try another.
Title: Re: 2 new bows
Post by: wood_bandit99 on August 08, 2013, 05:35:18 pm
Nice lookin bows! But I think mike is right. It is bending too much too close to the handle but not enough like the outer 1/3 unless the design is supposed to be like that. Give us a front shot.