Primitive Archer
Main Discussion Area => Arrows => Topic started by: hilltophickory on May 27, 2013, 08:42:01 am
-
I tried to remember a few things from past archives but I cant remember it all so I got a few questions . I have never made cane shafts before so I cut plenty . SMALL end what avg dia? large end what avg dia? and appx length around 30 inchs fine? and they are quite green and ive got them bundled so is it best to work them green or just let the set and dry a bit ? any thing else that may help thanks guys.
-
I use an open end 3/8 wrench to cut the big ends of my cane/bamboo. But I also cut them at least 4' long so I have more area to work with while straightening. I bundle mine up in bundles of a dozen, and put 5 rubber bands on the bundle. But not real tight. Just tight enough to hold them and let the rubber band shrink down with the cane as it dries. I usually let mine dry at least 6 weeks or so in my basement before working them up. Hope this helps.
-
I do similar as Stringstretcher. Are you sure all the culms (canes) you cut are mature(at least 2 years old). If not the immature ones will wrinkle lengthwise as they dry and will be too flimsey for arrows.
-
Pat , I dunno but Iwill find out , when cutting I forgot how to determine younger from older. something to do with featering of the leaves do any one have yearling shoots and 2yr shoot pics?
-
With the native canes if the paperlike sheath at the nodes is deteriorated or gone all together they are old enough.
-
I cut mine quite a bit longer than my draw. I have about a 26" draw, so i cut mine between 35 and 40. I find you don't have to worry about spine as much when they are that long. Hope this helps.
-
OK , next time ill cut with no sheaths, I have read the home depot arrow making thread , I will try to follow it some.
-
The HD cane has already been sorted and cleaned. When you get cane from the woods you have to do that stuff yourself. ;)