Primitive Archer
Main Discussion Area => Bows => Topic started by: Bitterguy on March 25, 2013, 11:25:21 pm
-
So I just got aggravated trying to make a double flem loop strong for like an hour and a half straight I would get the the point where the string tier would meet the twist of the second loop and it would pnch my fingers so I couldn't twist it anymore and whenever I would pull on one of the loop the strong would start to unstwist at the area previously mentioned >:( >:( >:(
And just to kick me while was down the string came put to short when I gave up and tried to timber hitch it >:(
Any help would be greatly appreciated, I tried poor folk bows but that just confused me even more
-
Post some pics of your string as it is now.
-
You tube has some good vids.
-
Post some pics of your string as it is now.
Ill post pics of what happens when i attempt a flam tomorrow
-
YouTube is amazing... better than duct tape
-
Maybe this link will help you out.
https://www.rmsgear.com/store/pc/tutorial_string_2bundle.asp
-
You need to lay in the first loop, then when you have laid in enough twists past the tag ends of the string, lay in the same amount of twists again. You will notice that when you start laying it the 2nd end as you make a twist it comes out of the 'extra' that you laid in on the first loop.
If you haven't done many it normally takes one practise string to get the length just right on the 2 nd go. Fastflight is way easier to use because it does stretch when you bed the string in.
-
Watch some videos on youtube. This one helped me the most. Its a videos series and he goes into good detail.
ww.youtube.com/watch?v=e4x7W71_MQQ&list=PLXrddkruLyAhq7QQ7LPW0DQsKKt0T5gfi
Remember to add the extra "w" in the address when you search it.
-
Why not just do like the Indians did and tie on the top nock (timber hitch) , then you only need one loop , and every string is a “universal” string ...
-
So I just got aggravated trying to make a double flem loop strong for like an hour and a half straight I would get the the point where the string tier would meet the twist of the second loop and it would pnch my fingers so I couldn't twist it anymore and whenever I would pull on one of the loop the strong would start to unstwist at the area previously mentioned >:( >:( >:(
And just to kick me while was down the string came put to short when I gave up and tried to timber hitch it >:(
Any help would be greatly appreciated, I tried poor folk bows but that just confused me even more
Bitter,
Here is a link on how to do it without any jigs or even a tape measure. I don't know much about building bows but I do make all my own strings for the bows I build.
http://www.youtube.com/watch?v=DfyPOikbBvA
When the guy gets to the part when he twists the string on his pant leg ignore it as I have tried it and it makes a mess that isn't right for me. I just continue to twist the string just like when he twists in the first loop. Then watch closely when he gets to the final loop and how he braids it back into itself. If this is not done right the string will come apart. If your bow is say 69 nock to nock what I do is pull off as long as I am tall or the span of my arms outstretched from side to side then add the lenght of one arm to that length and it works for me.
When you have most of the string twisted loop the string on your bow and pull it snug up the bow to about 3.75 - 4 inches from the nock end of your bow. this is where you begin to make your second loop. braid about 4 inches back into itself and you now have a bow string. twist or un twist till you have the brace you need to get good arrow flight (about 6- 7 inches. for me). Shoot the bow with out serving for about 50 shots which will allow the string to stretch a little after that serve it up. You can find serving diy in you tube as well.
I like the KISS method of not using a tape measure for my strings. If the string is a little too long or short just build another and make it a little shorter/ longer. If you end up with a string too long just build another bow for it ;)
Also one of the loops needs to be a little bigger than the other. Don't make either too big though. Use your bow as a guide.
Hope ya can git er done in time for warmer weather so you can bow fish with it or even turkey hunt depending on where you live. :)14 strands is plenty for a 50 - 60 lb bow. I don't care for a timber hitch unless I am making a tillering string as that is one more thing to go wrong when you are at full draw with a nice deer or turkey at 15 yards, I have enuf trouble hitting the buggers as it is.
Hope this helps,
Greg
-
So I just got aggravated trying to make a double flem loop strong for like an hour and a half straight I would get the the point where the string tier would meet the twist of the second loop and it would pnch my fingers so I couldn't twist it anymore and whenever I would pull on one of the loop the strong would start to unstwist at the area previously mentioned >:( >:( >:(
And just to kick me while was down the string came put to short when I gave up and tried to timber hitch it >:(
Any help would be greatly appreciated, I tried poor folk bows but that just confused me even more
Bitter,
Here is a link on how to do it without any jigs or even a tape measure. I don't know much about building bows but I do make all my own strings for the bows I build.
http://www.youtube.com/watch?v=DfyPOikbBvA
When the guy gets to the part when he twists the string on his pant leg ignore it as I have tried it and it makes a mess that isn't right for me. I just continue to twist the string just like when he twists in the first loop. Then watch closely when he gets to the final loop and how he braids it back into itself. If this is not done right the string will come apart. If your bow is say 69 nock to nock what I do is pull off as long as I am tall or the span of my arms outstretched from side to side then add the lenght of one arm to that length and it works for me.
When you have most of the string twisted loop the string on your bow and pull it snug up the bow to about 3.75 - 4 inches from the nock end of your bow. this is where you begin to make your second loop. braid about 4 inches back into itself and you now have a bow string. twist or un twist till you have the brace you need to get good arrow flight (about 6- 7 inches. for me). Shoot the bow with out serving for about 50 shots which will allow the string to stretch a little after that serve it up. You can find serving diy in you tube as well.
I like the KISS method of not using a tape measure for my strings. If the string is a little too long or short just build another and make it a little shorter/ longer. If you end up with a string too long just build another bow for it ;)
Also one of the loops needs to be a little bigger than the other. Don't make either too big though. Use your bow as a guide.
Hope ya can git er done in time for warmer weather so you can bow fish with it or even turkey hunt depending on where you live. :)14 strands is plenty for a 50 - 60 lb bow. I don't care for a timber hitch unless I am making a tillering string as that is one more thing to go wrong when you are at full draw with a nice deer or turkey at 15 yards, I have enuf trouble hitting the buggers as it is.
Hope this helps,
Greg
Thank you so much for that video. What i was doing was trying to twist in my second loop like i did my first one. But after watching that video I did what he did and i made a beautiful flemish twist string! Now to make a another one that is actually the right size for my bow haha
-
Hate to say it but that is not the way to make a good Flemish string. Sure it will make a string but not a good looking round string. Did you even look at the link I posted above? Here it is again.
https://www.rmsgear.com/store/pc/tutorial_string_2bundle.asp
-
Is that just an aesthetic thing? I personally like the look of a more cabled strong albeit not nearly as loose as he made his look.
-
Well make your cabled string and then serve it in the middle for your arrow nocking point, and see how rough your serving lays on the string and then you tell me if you still like cabled strings:)
-
That youtube video isn't very good at all. Sure you'll get a functioning string but he missed a lot of little things out that go to make a quality string.
-
Glad it works for you bitter. So are ya planning on hunting w your new bow?
Greg
-
That youtube video isn't very good at all. Sure you'll get a functioning string but he missed a lot of little things out that go to make a quality string.
what doesn't work with the string made like that? If I do my job my bow will hit a ten inch target at 40 yards shooting red osier shafts.
Seriously though, got a vid?
Thanks ,
Greg
-
That youtube video isn't very good at all. Sure you'll get a functioning string but he missed a lot of little things out that go to make a quality string.
what doesn't work with the string made like that? If I do my job my bow will hit a ten inch target at 40 yards shooting red osier shafts.
Seriously though, got a vid?
Thanks ,
Greg
The strength of the Flemish string is created by the friction between the two bundles. Cabled bundles have less physical contact between the bundles than a fully melded round string. A round string also more evenly shares the tension between the two bundles whereas most of the cables strings I've seen (or made) seem to have one bundle that holds more of the weight. That is, one bundle will appear "straight" while the other bundle "wraps" around it. This reduces the effective strength of the string. Also, as Roy pointed out, a cabled string, once served creates a lumpy serving and could result in string movement when the arrow is knocked. Uniformity (roundness) is consistency. Consistency is good!!
-
I learned from the same vids as Slackbunny.
A very good series of vids that shows the same as Roys link but i find it easier to follow the video
here it is again.
http://www.youtube.com/watch?v=e4x7W71_MQQ&list=PLXrddkruLyAhq7QQ7LPW0DQsKKt0T5gfi
-
Glad it works for you bitter. So are ya planning on hunting w your new bow?
Greg
Possibly, but that means I gotta get off my lazy butt and get my hunting license and also find a friend of mine that bow hunts cus no one in my family does
-
Those were great videos. Thanks..
-
If ya live in Pennsylvania turkey season starts April 27th I think. And if you live near the great lakes specifically Lake Erie in June blue catfish start coming in to the tributarys to spawn and they get huge. A friend of mine caught two last summer and between the two he had 8 lbs of meat and it is tasty.
Greg
-
There are several ways to do many things or anything. Bad ways, Good ways, and the Best way. With Flemish Strings, the best way doesn't take any longer than the bad way. So why not build the best string you possibly can? Until I am shown a better way to build a Flemish String, I will build them like the link and videos show. I only mean to try and help folks not make the same mistakes I made early on in my string making adventures.