Primitive Archer
Main Discussion Area => Arrows => Topic started by: RBLusthaus on March 24, 2013, 01:34:26 am
-
The first set is 11/32, 40-45#, 31 inch poplar, 125 gr field point, 485 +-15 gr overall, black dye crown, and 4 1/2 shield cut, left wing feathers.
The second set is 11/32, 35-40#, 30 inch poplar, 100 gr field point, 435 +-15 gr overall, 4 1/2 shield cut, left wing feathers, with walnut 4 wing arrow head footings.
-
very nice! did you buy or make a jig for footing the arrows?cresting looks good too!
-
Please do a tutorialon how to get those perfect splices you do for the footings...
-
Wow! :o Those are nice! 8) Oh indeed, and tutorial on splicing in footings!
Wayne
-
Those are nice I would like to see how you do the splice for the footings also.
Rob
-
yeah, really nice work!
the first set really grabs at me the most...very fine cresting work!
-
Great looking arrows, especially the footed shafts. Does the forward fletching in the first batch add benefit? Thanks
Tracy
-
Thank you for the kind words.
Stefan, I made the jig I used. Found a build post on trad gang, I think. If you need a pic, let me know. It is similar to the 3rivers jig, but made from wood. It works pretty well, once it is dialed in to the fence settings. I use it with a router bit in the drill press. BTW, not sure if you remember, but you gave me a tip when I first joined PA, about using making tape in front of the wing points to keep from sanding too deep - - anyhow, thank you as it has worked like a charm for me.
I have never been asked to do a build along before - very flattering. I will try to put something together soon. These are very time consuming.
Tracy - - the forward fletching is for a customer with these big fat stumpy looking meaty things on the end of his hand some people call fingers (not me). The extra space is protect the feathers from the "bull in a china shop" who will be shooting them.
Russ
-
I see, makes sense. Again, nice work!
Tracy
-
Beautiful arrows,love both sets. :)
Pappy
-
Thank you for the kind words.
Stefan, I made the jig I used. Found a build post on trad gang, I think. If you need a pic, let me know. It is similar to the 3rivers jig, but made from wood. It works pretty well, once it is dialed in to the fence settings. I use it with a router bit in the drill press. BTW, not sure if you remember, but you gave me a tip when I first joined PA, about using making tape in front of the wing points to keep from sanding too deep - - anyhow, thank you as it has worked like a charm for me.
I have never been asked to do a build along before - very flattering. I will try to put something together soon. These are very time consuming.
Tracy - - the forward fletching is for a customer with these big fat stumpy looking meaty things on the end of his hand some people call fingers (not me). The extra space is protect the feathers from the "bull in a china shop" who will be shooting them.
Russ
Hi Russ,
I do remember! Pleased to hear that I helped you out, that is what this site is about. I love your arrows the came out nice. Maybe you could post a picture of your jig...I posted my jig a while back too, maybe it will help people visualize on how to get started when making footed arrows.
Greeting,
Stefan
-
Nice shafts.Appreciate your work and sharing.Perfect sunday go to shooting arrows.
-
Here are some pics of the homemade footing jig. All views. Just 2 pieces of wood bolted together, with the tricky groove down the middle. The jig holds the arrow shaft with the leading edge higher than the trailing edge(4.5 inches) so that the bit cuts almost to the center at the forward most part of the shaft and tapers off to cutting air about 4 inchs in.
Hard to explain in words. Easier with pics, I think. I will put some "action" shots together in the near future.