Primitive Archer

Main Discussion Area => Primitive Skills => Topic started by: Newindian on March 15, 2013, 02:47:29 am

Title: help with first cordage string
Post by: Newindian on March 15, 2013, 02:47:29 am
This is made from Spanish dagger, gets to thin for my liking in a spot about 4mm. The bow it is for isn't finished but I don't think it will be more than 50#. I may be able to do another Flemish loop on the other side to thicken it up. Oh yah don't pay attention to that suspicious looking object in the corner ::)
Title: Re: help with first cordage string
Post by: PrimitiveTim on March 15, 2013, 11:02:29 am
If it gets thin in an area that means there weren't enough fibers in it so you could just go back and add a few more fibers.  What I do with my agave strings is make a thin string about 14 feet long then double it over on itself.  That way things kind of get evened out.  Not sure how how the flemish loop is going to work with that though. 

When I start making a string I start at the size I want the whole string to be and as I go I'm constantly comparing the newest part of the string to the first part and check the size.  That way I'll have an idea of how many fibers I need to add to keep it even.  Just be a little more careful and slow when you're making your string.
Title: Re: help with first cordage string
Post by: iowabow on March 18, 2013, 08:56:00 am
I think that the strings that makes up your cords are not equally wrapped. This will cause one to fail.
Title: Re: help with first cordage string
Post by: richardzane on March 19, 2013, 10:00:47 pm
yeah its pretty important to get an EVEN cord. I'd be careful with that one. :-\    you could hurt someone.
If you really want to make your own strings you'll need to simply put in the time making yards and yards
of it just to get the feel for it....eventually you'll feel with your fingers when to add more.
when you have four or five yards of string you'll be able to pick out a section of even twist.
knots;
one method that works good for cordage bow string without the flemish loop is the knot
you'll find on an old lariat . make a single knot on the end then pull a slip knot to it.
if you aren't sure what i mean i can try to show you with pics.  it works great...and won't slip.

 
Title: Re: help with first cordage string
Post by: PrimitiveTim on March 19, 2013, 10:06:52 pm
Richard, I'm interested in this knot you speak of!
Title: Re: help with first cordage string
Post by: richardzane on March 19, 2013, 10:27:37 pm
sure,
here's the knot that seems to hold up great for me on a dogbane bowstring.
the second picture is from a year old bowstring that finally wore out...but not at the knot!
Title: Re: help with first cordage string
Post by: PrimitiveTim on March 19, 2013, 10:41:38 pm
so simple!  I like that.  Should you always twist your cordage real tight?  I double reverse twist mine.  Is that a good idea?
Title: Re: help with first cordage string
Post by: richardzane on March 19, 2013, 10:54:59 pm
for a bowstring i twist it as tight as my hands can twist it , less frays to trimm off and then i beeswax them.
you can actually see the beeswax on these strings.

 a double ply ,yes twist each of the two plys the opposite way the cord itself will twist.
Title: Re: help with first cordage string
Post by: iowabow on March 19, 2013, 11:41:43 pm
I wrote two articles about bow strings for the last two issues of PA mag. I think you would find them very helpful.
Title: Re: help with first cordage string
Post by: Newindian on March 20, 2013, 12:05:23 am
I ended up completely redoing the string, it will be a while till I can see how it holds up to shooting. Came out much more even this time and I made it slightly thicker.
Title: Re: help with first cordage string
Post by: Stringman on March 20, 2013, 11:20:45 am
I posted this build along last year of my Flemish twist linen string. I believe the only difference between my string and yours is practice.

http://www.primitivearcher.com/smf/index.php/topic,35214.0.html

For a knot I use a timber hitch.
Scott
Title: Re: help with first cordage string
Post by: Thesquirrelslinger on March 21, 2013, 02:08:31 am
Question- 1. Does Jute make a good bowstring?
2. does sisal make a good bowstring?
3. I twist my strings a LOT less. And splice, not knot...
-Squirrel
Title: Re: help with first cordage string
Post by: richardzane on March 21, 2013, 12:21:30 pm
do what works the best for you. best to avoid knots besides the timber hitch, but if they work..use em!
Native American  bowstrings i've seen are all knotted.
My ancestors seem to have been able to survive for thousands of years without a flemish loop...or i wouldn't be here! :)
the nice thing about a natural fiber string is when it breaks, even out in the field, it can be added to and repaired easily.
I doubt you can do that with B-50...

cord twisted tight makes a "tougher" string - compacted ...but it also has more problems with stretch in the beginning.
but dogbane cordage won't stretch too much and its "waterproof"...it was also used for fishing nets.
Title: Re: help with first cordage string
Post by: Thesquirrelslinger on March 21, 2013, 06:48:52 pm
I made a sisal bowstring from fiber last night. Works on a 50 pound recurve, around 3/16 inch thick. Very, very tight twist- not the twist, just under tension every fiber shares load. Faster than my b50 string... its wierd, I guess cause its thinner.
probably less durable though.
-Squirrel