Primitive Archer

Main Discussion Area => Arrows => Topic started by: Scottski on January 09, 2013, 10:45:15 pm

Title: feather sanding jig.
Post by: Scottski on January 09, 2013, 10:45:15 pm

not sure where to add this so here goes. sorry if its in the wrong spot. feather sanding jig i made from a pair of vice-grips 2 peices of flat steel 10 in. long and some jb weld. i have no welder. it works good so far.

Title: Re: feather sanding jig.
Post by: Adam on January 09, 2013, 11:27:39 pm

That looks like that should work perfect.