Primitive Archer

Main Discussion Area => Arrows => Topic started by: cdpbrewer on November 24, 2012, 03:21:44 pm

Title: Arrow storage stand
Post by: cdpbrewer on November 24, 2012, 03:21:44 pm

Tubes are made from PVC flashing rolled into a cone kind of shape and shipping tape applied to seam.  Wood plug in bottom of each tube is held in place with staples.  Eight tubes were fastened together with duct tape.  Stand is a simple chunk of wood with a dowel glued vertically into it which slides up between the tubes.  Hope you like it...

c.d.

Title: Re: Arrow storage stand
Post by: JW_Halverson on November 24, 2012, 03:30:51 pm

An elegently simple solution...the very best kind!  Nice work, thanks for sharing!

Title: Re: Arrow storage stand
Post by: Parnell on November 24, 2012, 03:46:12 pm

Super!

Title: Re: Arrow storage stand
Post by: smoky#1 on November 24, 2012, 06:32:18 pm

That's really cool!

Title: Re: Arrow storage stand
Post by: adb on November 25, 2012, 10:27:28 am

That's a great idea. I think I'll have to do that for storing arrow shafts in the shop. Thanks!

Title: Re: Arrow storage stand
Post by: BowEd on November 25, 2012, 12:19:37 pm

Nice solution to organizing your arrows.They do build up over time that's for sure, then you have an arrow for almost any kind of bow you could make too.

Title: Re: Arrow storage stand
Post by: Patches on November 27, 2012, 03:20:51 pm

Good idea! I have been looking for a solution.  Several of mt arrows end up laying on the kitchen table and the pile just keeps growing. Thanks for sharing!

Title: Re: Arrow storage stand
Post by: Stalkingfox on November 27, 2012, 06:04:26 pm

Wont they warp and bend in time? Thats assuming its long term.

Title: Re: Arrow storage stand
Post by: outback118 on March 11, 2013, 08:38:09 pm

Hope you dont mind if I steal it, your idea that is. Tubes wrapped in white birch wallpaper and trimmed in fir.