Primitive Archer
Main Discussion Area => Bows => Topic started by: tom sawyer on October 19, 2012, 06:56:03 pm
-
Had this 64" deflexed stave laying around the shop for a few years now. I decided to cut out a couple of bow blanks and thought I'd give this one a shot. One limb was about 3" deflexed and was no problem, the other was closer to 6" with a little dogleg to boot. Clean little piece otherwise with decent rings. Kept waiting for that "tink" sound of a splinter popping but never heard it, and with patience and plenty of heatgun I managed to clamp it to the form. To my further surprise it held most of the shape when I released it the next morning. Needs some touchup work but its got a nice bit of reflex already.
-
Holy Shiite Muslim! Talk about taking charge and telling that stave how the stick floats!!!
Sic 'em Tom, show that stave who's boss!
-
Tom, was that done with dry heat only? Looks like it's going to make a nice bow.
-
Tamed that sage!
Tracy
-
Been awhile since you posted a bow Lennie. Looks good
-
Lennie,
I was wondering where you had been recently and hadn't really heard.......wait, what the heck is that piece of "sculptured" wood under the caul?
-
That's amazing! Nice caul setup, too.
-
Thanks for the replies.
Fred yes this was bent using dry heat only, no oil either. I have a steaming setup but haven't used it in a long time.
Marc, I mostly lurk these days since I don't make that many bows. It kinda goes in spurts. I have some other hobbies that also compete for my time.
Pat thats the shop goddess. It is a sculpture I came across some time ago. I recently sanded her and have been refinishing with tung oil. Nothing like rubbing your tung on a wooden nude bust.
-
Nice work on that piece of sage it sure looks good to go now. Osage amazes me sometimes, I had two splits from a branch in my shop for two years that I thought was way to propellor twisted to make bows from. One day earlier this year I rough shaped bows into them and
reduced thickness to 1" and took the heat out. Ten minutes of heat and wrenching and straight as could be and held that straightening
too. Good job on yours, show us what you make out of it.
Greg
-
Good to see ya back at it Lennie,looking forward to seeing that one finished. :)
Pappy
-
Thanks for the replies.
Fred yes this was bent using dry heat only, no oil either. I have a steaming setup but haven't used it in a long time.
Marc, I mostly lurk these days since I don't make that many bows. It kinda goes in spurts. I have some other hobbies that also compete for my time.
Pat thats the shop goddess. It is a sculpture I came across some time ago. I recently sanded her and have been refinishing with tung oil. Nothing like rubbing your tung on a wooden nude bust.
Hmmm...THATS the other hobby! ;D
-
Hey Lennie,
Good job getting that stave bent back the way you want it. Was that one that I gave you?
Nice to see that the shop godess is getting so much attention. Careful you don't let Shannon catch ya with yer tung out tho...
;) ;D