Primitive Archer
Main Discussion Area => Around the Campfire => Topic started by: DRon knife on July 17, 2012, 11:16:11 pm
-
Howdy! A friend killed a nice rattler and asked me if I knew how long he should leave it stretched and salted for? I didn't know so I thought I would ask the pros? Any help would be greatly appreciated,being that I will be the recipient when done ;D Thanx,Ron
-
As thin as they are, a day or two will usually do the trick.
-
Ive never used salt either. Just tack em down (flesh side up,) and they will be dry in no time.
-
Like they said no salt. As hot as it is a couple of hours should do it.
Cipriano
-
I like to leave mine tacked down for a week or two just to make sure they are good and dry even though they seem dry after the first day. I don't use salt either.
You should have your friend put the carcass somewhere the bugs can clean it for him. The vertebrae make a cool looking necklace.
-
The salt will attract moisture to the skin wich can cause it to rot. He should rinse all the salt from the skin and re-stretch the skin to dry. What is your friend gonna use the skin for?
-
If you feel the need to put something on it, 20 Mule Team Borax is your best bet. Then brush it off into a tub and it can be reused...atleast that's what I do. ;) dp
-
I never salt them. Just tack them down at the head and move toward the tail, scraping any membrane or flesh off as I go with a spoon. When done tacking, it is clean,and only takes a couple hours in the sun to dry. Untack and roll it up and hold the roll with a rubber band. I have a gallon zip lock bag that I put them in for storing.
Tracy
-
Nix on borax as well. I get skins in from friends every now and then, I have found you can't always tell if a skin has been salted or boraxed. Bottom line, they just won't stick on a bows back if they have been treated.
Last time I encountered treated skins, I was deep into gluing a set on the back of a bow and noticed things weren't going right. I removed the skins, washed the glue off the back of the bow and headed to the laundry sink with the skins. I washed the skins and washed and then washed them some more. I washed the skins for at least a half hour.
My next attempt at backing a bow with them went just fine.
I later found out the skins had been salted, I couldn't tell it from looking at them.
-
Nix on borax as well. Bottom line, they just won't stick on a bows back if they have been treated.
I'd say you're right on w/ that Eric. I haven't backed a bow w/ snake, I tanned one and made a headband and the other my wife sewed to some felt and we display it. I don't kill snakes unless they are poisonous and near my house. The head band is copper head the other is rattler.
-
ok guys great!! I now have one side of a nice bow,it may just make a pair if I have a matching skin somewhere.Thanks a bunch! Ron :)