Primitive Archer
Main Discussion Area => Bows => Topic started by: footfootfoot on January 24, 2012, 12:20:02 pm
-
First, I am not trolling here or wanting to start a flame war, but I have been really perplexed by the existence of "Bow Stringers." Back when snakes could walk and I was young, we learned to string a bow by "stepping through the string" method. Now I hear and read everywhere that the only safe way to string a bow is with a bow stringer. I'm not really convinced. In my more cynical moments, I think they are a gimmick invented just to give us another thing to buy. On the other hand, maybe they are useful for heavy draw weight bows. But on the other other hand if you are strong enough to pull a heavy weight bow you ought to be strong enough to string one.
I just read a thread in another forum where some guy claims his wife's uncle killed himself stringing a bow with the step through method. I just don't see how that is possible as you are pulling the bow towards your body. If something lets go it springs back away from your body.
Again, it seems passions run deep about how to string a bow and I don't want to start something but I am really skeptical about the need for bow stringers.
-
didnt hurt myself, but nearly killed my kat the first time i used a bowstringer....she still runs when she sees a bow!
-
Stringers are very useful if you've got a reflexed, ultra narrow tipped 'special', also step through isn't great with elb's as you end up torquing the limb. Push pull is the best for most bows with the stringer reserved for the cautious.
-
Push pull is what I use most of the time unless it is a heavy bow or longer than say 64 the it is hard for me to reach that far as I push,I use a stringer then,never step through.See to many bows[mostly glass or lamanated] busted that way. :)
Pappy
-
A bow stringer is probably the safest(for you and the bow) method of stringing a bow. Personally I use a push/pull method on most bows but like Pappy I use a stringer on heavy bows and longer bows that I'm not comfortable stringing. I have heard that the step through method is OK with selfbows but not good for glass bows. .
-
I would say that providing you are doing either method properly and are comfortable with the weight and position they should all be safe for you and the bow.
I prefer push pull as its easier to put an even strain on both limbs at the same time which is the main point i guess. Could never get on with a stringer just didnt work for me.
-
I think the step threw method is about the hardest method there is to string a bow, especially on anything long or over 60#. I tried to make myself do it for a little bit, but it just kills my back, feels like it is twisting my spine on heavier bows. One short bows, what I do is wedge the bottom tip on the ground, lean the bow forward a bit, and put my knee on the handle or a little higher than the handle (so I don't put all the pressure on the bottom limb) and string the bow that way. On heavier (90# or more) sometimes ill use my bare foot. I would say that doing it this way could easily put more pressure on the bottom limb than the top if your not careful though. But for me it is physically easier than doing it any other typical way, definitely including using a stringer. (But yes, I still use em, obviously caring more about the health of my bows than the health of my body, :laugh:). And mike makes a great point about recurves and stringers.
-
I'm 6'2" and have used push pull on 65# bows 70" long, but that's about the max length that I can do without a stringer, Bub
-
I use push/pull on straight and mildly recurved bows.
On deep recuves and lam or FG bows i always use stringers,i have seen too many ruined bows on the club not to.
/Mikael
-
i use push/pull on light bows and stringer on the rest.a stringer makes it a whole lot easier for me.i am short five foot four guy and it is hard for me to push/pull alot of them.static recurves are a bear for me without a stringer.if you can find a webster stringer,get it.it will string most bows safely.
-
Push/pull, even on warbows up to 100#.
-
Push pull on all my long/self bows. I step through with my recurve fiberglass fishing bow - it's a tank and I doubt anything could kill it.... If I had a quality laminated recurve, I would go to the stringer. I have a few stringers hanging on the wall in my shop, but I have to agree, I almost never use them.
-
is it possible to make an efficient stringer with stuff around the house? I tried to make one from an old leather belt and some nylon cord but it kept slipping off of the bow's nocks. Any tips for making an easier one?
-
Never tried a stringer, the push/pull method seems like the smoothest method to me. Step through makes me feel like I'm going to damage the top limb.
-
Push/Pull, but on heavier bows I reverse it and have the belly toward me. I've been criticized and know that a tip could break, but I've got an 80# 70" ELB that I use do unconventionally by having the bottom limb on a softer ground surface that's stable "a mat" then flex down with my left elbow and pull over the top nock with my right hand stringing the bow. It may not be the best method but it works and is safe. I should post a short video of that and get out the popcorn ::) ;D.
-
Push/Pull on everything unless it is too heavy or reflexed/recurved. Then I usually make it with double nocks and use a stringer/long string. Have never used the stringers with leather pockets on the end because I'm afraid they'd slip off.
Here's an example of the double nocks I mentioned:
(https://lh5.googleusercontent.com/-3jIHocVUfr4/TWGoxO2_5HI/AAAAAAAAA9Q/W8gKJcLL5HY/s640/ro-2nd-tip.jpg)
-
My .02 is that if I'm stringing something like a laminated recurve, I'll use a stringer that is designed for it. I know for a fact that years of stepping through will twist a limb on a glass recurve. Seen it too many times. Push/pulling a glass recurve can be a good way to break a limb tip. On my longbows, I push/pull. I'm always careful to protect the limb tip when I do. I have a longbow stringer just in case, but I rarely touch it. If I can't push/pull it, it's probably too heavy for me to shoot anyway. Now if we get into warbow territory, I'm going to go ahead and put in the extra string grooves and use a long string as a stringer, then get out the ibuprofen and take a few, so they kick in by the time I'm done shooting.
-
I once broke a bow using a stringer. Those Selway types un-evenly load the limbs. The bow broke mid limb. I was standing in front of a mirror cause I was curios to see... I found out!
-
I use push/pull on anything up to 55# anything over that I usually step through...Just being honest....
-
Push/pull for me too.
I hate havin to find a dang stringer.they are never where ya need em.I will say,that a stringer is probably best for beginners,untill they get the PP down.As for needin em for heavy weight bows,an old timer told me,when i was young,that if ya cant string it,ya probly shouldnt be shootin it.This was regarding the P/P method.
-
step thru for me,don't like how push pulls can bend the limbs unevenly...scary!! Bow stringer who???