Primitive Archer
Main Discussion Area => Primitive Skills => Topic started by: mspink on December 14, 2011, 06:44:55 pm
-
Hey guys, got two deer hides and maybe a third on the way. Need to know what you guys do with them if you are just going to use them for backing bows. Thats all i plan on doing with them. All i have is 2 by 4's and screws. I think i just need to stretch them out scrape the flesh and fur and let it dry right. Let me know if i am way off
-
You need to flesh the hides before you put them on a rack to stretch and dry. Then you have to "dry scrape" the hair off. Theres some real good info over at paleoplanet on the subject.
http://paleoplanet69529.yuku.com/forums/5/Leather-Hides-amp-Tanning#.TulVBZjGekQ
Hope this helps :) :) :)
-
I strecth the hide on aframe, then flesh it immedietely. You can always go over again later if you find that u missed some. After 3-4 days u can turn it around and start dry scraping the hair off. This is not a hatd process, but somewhat time consumin. I have a good handmade scraper that has proved perfect for this work. Without it, I'm not sure if I would be inclined to waste my time on it. I've also used stones for this and prefer my steel scraper.
-
I always flesh it first ,right off the deer or if I have to wait I will soak it so it is soft.
Then stretch it on the rack,let it dry a few day hair side to the sun if possible then
dry scrape.Then you have rawhide or ready to tan into buckskin/leather. :) :) Here
are a few pictures of the process.I us a draw knife for fleshing,it is pretty quick work.Kind of like chasing a growth ring to get the meat/fat and menbrain all off at the same time. :) With a little practice it's not to bad a job. :)
Pappy
-
Do you have to get the hair off before it dries or can u wait till after?
-
dry scrape = after it's dry! (not tryin' to be a smart&$$)
that's why they scrape some of the hair off in that zig-zag pattern- so that the
hide will dry thoroughly.
hopefully they'll correct me if I'm wrong but I'm pretty sure they flesh 'em wet,
the dry scrape the hair off.
-
What Sonny said.after it is racked let it dry hair side toward the sun if possible.It will tighten up and then you can scrape it.If you try and scrape it while it is still wet or not fully dry if will try and waffle board on you. :) No real hurry after you get it racked and it dries to get the hair off.I have left them for a month or 2. I would rather not do that but sometimes things get in the way and they really don't hurt,all they are at that point is rawhide with the hair on. :)
Pappy
-
What Sonny said.after it is racked let it dry hair side toward the sun if possible.It will tighten up and then you can scrape it.If you try and scrape it while it is still wet or not fully dry if will try and waffle board on you. :) No real hurry after you get it racked and it dries to get the hair off.I have left them for a month or 2. I would rather not do that but sometimes things get in the way and they really don't hurt,all they are at that point is rawhide with the hair on. :)
Pappy
Pappy,
What are you using to dry scrape with?
-
It is a bought scraper I got from a tanning co. Not sure the name.I tried to make several but this works much better than the ones I made. It is basically a rounded blade mounted at an angle on a handle.I will try and get a better picture of it when I get back to the cabin. :)
Pappy
-
Sounds good. Thanks Pappy!
-
the easiest way i,ve found to remove hair,and i assume you want rawhide, is to throw the whole thing in container of water. no fancy solutions or anything.let set about three days and check for slippage. if no check tomorrow.stinks like hell but,is much easier to scrape.may wrinkle some but smooths right out on bow backs.i also use it on squirrel hides for bowstrings.
-
When you slip the hair wet, whether with plain water or lye added you are starting the hide on the way to rotting. After five days in the water I have found nothing but hair and stinky jello. JMO, I think it weakens the hide.
-
I do also Eddie,but lots of people do it that way.Here are some pictures of the tool in case you want to replicate it. :)
Pappy
-
What Pappy said is dead on.
Here is a link to the place to buy a scraper like the one pappy uses.
http://w ww.braintan.com/mm5/merchant.mvc?Screen=CTGY& Store_Code=1&Category_Code=Tools