Primitive Archer
Main Discussion Area => Bows => Topic started by: amishfoot on December 06, 2011, 10:46:05 pm
-
Ok i took off a little too much while tillering so i think im just going to to make it a tri-lam.? Suggestions?
-
Add two more layers? ??? Maybe you could be a little more specific.
-
Pics would be good for those of us that can't read or write but like to look at the pretty pictures!
-
Ok i took off a little too much while tillering so i think im just going to to make it a tri-lam.? Suggestions?
I would suggest if you're going to make a tri-lam, you should set out from the beginning making a tri-lam. I'm guessing your bow has come in under weight? If it has, figure out what caused it, and try again.
-
sorry guy but i dont have a camera and im illiterate :o haha but adb i will probly take your advice and jus try again
-
Go ahead and tiller that stave out. It will be good experience for you. If it comes out too light, give it to someone that will shoot it and appreciate it. ;)
-
Ok i took off a little too much while tillering so i think im just going to to make it a tri-lam.? Suggestions?
I would suggest if you're going to make a tri-lam, you should set out from the beginning making a tri-lam. I'm guessing your bow has come in under weight? If it has, figure out what caused it, and try again.
2nd that
-
Yup...finish it out . Good practice and probably make a good kids bow! ;)