Primitive Archer

Information and Resources => Trading Post => Topic started by: bowtarist on December 05, 2011, 11:12:53 pm

Title: brass casings for blunts needed!
Post by: bowtarist on December 05, 2011, 11:12:53 pm

I'm in need of some brass shell casings to use for blunts on 11/32" arrows.  Anybody got any?  We'll work out the trade.  I need em pretty quick.  I thought I had some, but was wrong again. Thanks, dpgratz

Title: Re: brass casings for blunts needed!
Post by: jeffhalfrack on December 05, 2011, 11:25:42 pm

Can you  use      .38   .357?     How  many?    Let me know  jeffw

Title: Re: brass casings for blunts needed!
Post by: bowtarist on December 06, 2011, 12:32:04 am

Either size should work beautifully.  I sent a PM.

Title: Re: brass casings for blunts needed!
Post by: fishfinder401 on December 06, 2011, 12:47:39 am

if i were you i would leave the bullet in them, add a little more punch >:D

Title: Re: brass casings for blunts needed!
Post by: Elktracker on December 06, 2011, 01:22:25 am

If half rack cant help ya let me know, The only difference between the two is length and either tends to be on the light side, I like to heat up some lead and add to mine before putting them on the shaft. I have allot so let me know if you dont get any.

Josh

Title: Re: brass casings for blunts needed!
Post by: bowtarist on December 06, 2011, 10:20:53 am

Cool, thanks Josh.  I would probably like the longer ones.  I'm using them to make leather covered blunts.  I'll add the weight too.  That was my plan.  Just need to get a few ASAP for the Christmas Exchange.  :( :P

Title: Re: brass casings for blunts needed!
Post by: Elktracker on December 06, 2011, 12:56:13 pm

Get me your address and how many and ill get them out today

Josh

Title: Re: brass casings for blunts needed!
Post by: jermcramp1 on December 06, 2011, 01:56:40 pm

Got plenty here too if you need.

Title: Re: brass casings for blunts needed!
Post by: bowtarist on December 06, 2011, 02:27:30 pm

Thanks guys.  I'll try to get you back when I can.  I need 3, would like 6 and could use as many as I can get.

Derik Gratz
9450 E. Baby Creek RD.
Bloomington, Indiana 47408

YOU GUYS ARE THE BEST.  SO HAPPY I FINALLY GOT ON THE WEB SITE.

Title: Re: brass casings for blunts needed!
Post by: Elktracker on December 06, 2011, 02:31:28 pm

I will get you 6 sent out ASAP, probably be more like tomorrow as I had a change of plans for today. Heading over to Strunks to do some work with him in the shop.

Josh