Primitive Archer

Main Discussion Area => Bows => Topic started by: wolfman6 on November 23, 2011, 02:26:34 am

Title: Osage Take Down
Post by: wolfman6 on November 23, 2011, 02:26:34 am

 I have 2 40in. Osage billets that I'm going to use for a take down. I was wondering if anybody has any suggestions on design layout to achieve 50-60# at 28 inches. This is my first osage bow so any help would be greatly appreciated.

Title: Re: Osage Take Down
Post by: soy on November 23, 2011, 05:51:56 am

I am no expert, so take this with a grain o salt...I would go with 66"ntn and 1.5" to fades out to mid than down to 1/2" or a touch less at the tips ...hope others will chime in I don't want to steer u wrong ...u are going to LOVE osage!!! Good luck and keep is posted ;)

Title: Re: Osage Take Down
Post by: Pappy on November 23, 2011, 06:59:22 am

There are a few on the build alongs,I have one on it and there are several others. :) Check them out. :)
   Pappy