Primitive Archer

Main Discussion Area => Bows => Topic started by: ~JM~ on June 08, 2007, 11:18:13 pm

Title: Penobscot
Post by: ~JM~ on June 08, 2007, 11:18:13 pm
I’ve been interested in this bow for a while now and I’m wondering if it’s worth all the effort, I mean, adjusting the back bow…does it really make for a sweet shooting bow?  Does it really cast a heavier grain arrow then a regular selfbow?  Does it feel like you’re pulling a 45# when it’s 65#?

Thanks.

j
Title: Re: Penobscot
Post by: Pat B on June 08, 2007, 11:54:31 pm
Marc St Louis built a beautiful example of a Penobscot bow a few years ago that was sleek and fast looking. Most of the others I've seen looked bulky and slow. I've never built one or shot one so I'm only speculating. ;)    Pat
Title: Re: Penobscot
Post by: Justin Snyder on June 09, 2007, 12:02:21 am
There are several articles in the past issues of PA. A lot of good info in the articles.  After reading them, I want to build one.  Most of the ones in the magazine look pretty good.  Justin
Title: Re: Penobscot
Post by: mullet on June 09, 2007, 12:18:54 am
  Marc said he didn't notice any advantage as far as speed.
Title: Re: Penobscot
Post by: bassman on January 15, 2019, 02:48:05 am
I have made double bows. Only advantage that I see in them is you can adjust bow weight, and no doubt are a conversation piece.
Title: Re: Penobscot
Post by: Del the cat on January 15, 2019, 02:58:56 am
The following is just my opinion:-
No no no no no!  >:(
It will never " feel like you’re pulling a 45# when it’s 65#"  >:(

However, it may feel like you are pulling 65# when you are pulling 45#tho'  :o ;)
Someone at sometime put forward this idea that it is somehow "like a compound" whereas it is the opposite!
When the second bow starts working the draw weight will increase not let off.

In the interests of fairness, I've never made one (nor do I plan to) and I dare say when made and set up by a skillful bowyer it will doubtless work just fine.
But it is never going to give any sort of let off as far as I can see.
I'm willing to be shown to be wrong if someone can show a force draw curve and explanation of how it is working.
Del
Some may think they are an abomination... I couldn't possibly comment  ::) ;D
Title: Re: Penobscot
Post by: ohma2 on January 15, 2019, 07:57:14 am
I made 3 of them and the 3rd was slimmed down and alot better than the first two . I am in Dels school of thought.it was a novelity that brought alot of inquiries but for advantages as far as shooting and performance there was none.
Title: Re: Penobscot
Post by: Mo_coon-catcher on January 15, 2019, 02:41:43 pm
The performance gain I found. Is if you make a bow that turns out too light. Add a backer bow and you can up the draw weight and get approx the performance of a normal bow pulling that weight. Just more bulk and mass to do it.

Kyle
Title: Re: Penobscot
Post by: gutpile on January 16, 2019, 08:05:38 am
I have found no benefit of the design..added weight and tillering issues .. not worth it IMO... gut