Primitive Archer
Main Discussion Area => HowTo's and Build-a-longs => Topic started by: jturkey on April 20, 2011, 05:27:46 pm
-
i'm going to have to bend around the handle area of a molly i'm trying out of hickory already got my steaming set up ready but before i start it i need to know the best way to brace/clamp it. i have large c clamps and a few others types as well i saw on here somewhere someone was doing a bending at the handle of a bow but can not findit in the search it looked like 2 2X4's nailed to a longer 2X4 and clamped inbetween them to make the bend.
with the smaller 2X4's bracing ouside the fades and the clamp or clamps in the handle area i'll get pictures of the bow in a little bit.
john