Primitive Archer
Main Discussion Area => Bows => Topic started by: skyarrow on March 17, 2011, 11:19:55 pm
-
Well here it is my first tree now before y'all go and say it's crooked look at the pics better the post it is mounted on is crooked not the tree now the bow I am tillering is a little lop sided the lower limb is stiff but now that I have a tree it will be fixed :) ttyl
Sterling
(http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/1c8dec3f.jpg)
(http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/1defc86e.jpg)
(http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/bf86aba9.jpg)
Here is the board I cut it from
(http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/bf442600.jpg)
-
(http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/cd9c50e8.jpg)
-
Not to be critical, but isn't that going to pull one limb more than the other having the tree tilted like that (because your pulley at the bottom is not aligned with the center of the bow)? You'd be better off having the rest tilted too, although that could add all kinds of confusion to eyeballing your tiller... if I was you I'd level out that post. Just my two cents.
-
Hard to see looking out into the light, but what I can see looks good to me Sterling. That is pretty close to what I have done too. Just be sure the handle is the only thing that touches the wood. If the limbs touch out at the ends of the support it might change the look of the tiller.
George
-
The string is Centered I just looks off I checked lol the handle on this bow is set lowers the arrow will rest at the top of the handle instead of the center of the handle and if you look where my pulley sits ther is a small block of wood to compensates for the center of the bow the other way also. I'm just making use of what I have :) I plan to make a better one for working stronger bows this one is for up to 40-50 # max
I havento start some were and this is what I have at this time :) thanx for the feed back
-
That looks like my set up. The only thing I added was a board behind it. That has helped me see the profile of the bow more. Looks good! :)
-
Nothing wrong with that,I like a full board behind mine but have a portable that works just like that.Nice work. :)
Pappy
-
Theres 2 things that will help you out. 1 Is don't make the 4x4 that your bow rest on longer than your handle.4 Inchs for most bows I like mine alittle smaller 3 1/2. It's easer to center your bow thiis way. You need your bow to pivet some what to get center when tllering.
2 It really helps to have a back ground. Get a peice of plywood and put it behind your tree. You can even make it detachable. That will just give you some referance points to see your limbs pulling evenly while tillering.
-
skyarrow, nice tree! You'll love it. I saw a HUGE improvement with the amount of set my bows were taking when I moved from my tillering stick to my tree. Before, 1.5"-3" was almost unavoidable, no matter how light the bow's draw weight. Now I have several bows that have less than an inch of set AND I can tiller a bow in half the time.
IMHO, the tillering tree has been the best "new" technique I have learned since getting back into making bows in late 2010.
-
Thanx guys for the helpful info I plan on tapering the inside of the the tree with a rasp so shorter handle bows won't touch the tree this bow is a kids bow that why it's much smaller in the handle it will be pulling 25# at full draw :)
-
The string is Centered I just looks off I checked lol the handle on this bow is set lowers the arrow will rest at the top of the handle instead of the center of the handle and if you look where my pulley sits ther is a small block of wood to compensates for the center of the bow the other way also. I'm just making use of what I have :) I plan to make a better one for working stronger bows this one is for up to 40-50 # max
I havento start some were and this is what I have at this time :) thanx for the feed back
I don't doubt that where you have your pulley rope attached to the bowstring is centered, or that the bow is centered for that matter. What I was getting at is that the pulley does not appear to be in a straight line with where the rope attaches and where the arrow pass is on the handle. This is an exaggeration, but that would be like pulling up or down on the bowstring while you pull it back, which would stress one limb more than the other. Maybe it's just the photo, but that's what it looks like to me. I'm not trying to bash your tree, just trying to save you some grief if it affects your tillering.
-
The string is Centered I just looks off I checked lol the handle on this bow is set lowers the arrow will rest at the top of the handle instead of the center of the handle and if you look where my pulley sits ther is a small block of wood to compensates for the center of the bow the other way also. I'm just making use of what I have :) I plan to make a better one for working stronger bows this one is for up to 40-50 # max
I havento start some were and this is what I have at this time :) thanx for the feed back
I don't doubt that where you have your pulley rope attached to the bowstring is centered, or that the bow is centered for that matter. What I was getting at is that the pulley does not appear to be in a straight line with where the rope attaches and where the arrow pass is on the handle. This is an exaggeration, but that would be like pulling up or down on the bowstring while you pull it back, which would stress one limb more than the other. Maybe it's just the photo, but that's what it looks like to me. I'm not trying to bash your tree, just trying to save you some grief if it affects your tillering.
Yep I see what he is saying you need to be sure and run a line square to the bow that would mean that the pulley at the bottom needs to be more to the right being that the post it is on is leaning.
-
Ty for your observation il run a plumbline and take a pic if i get off work early. it's a illusion because the post it's mounted on is not straight. I appreciat your concern I'm not mad this is what I wanted from y'all constructive critsizem to make sure it's all mounted right before I use it Ty again il post the plumbline pic soon :)
-
Sterling, I don't know enough to offer helpful advice or suggestions but I do have a question.
Who set that crooked-ass post? ;D
Lane
-
Haha well it's a old carport my wife and I bought this place a few years ago the house and carport were erected in 1983. That the year I was born lol so it has some age to it I be it was straight when it was first made
-
I used to put a scale on but it was a big pain the but, so I leave em off now.