Primitive Archer
Main Discussion Area => Arrows => Topic started by: seabass on February 03, 2011, 09:53:28 pm
-
hey guys.i don't post offten enough,but i have a question for you experts.i would like to tie some fletchings on with thread like on english arrows.i am going to glue the feathers first,but i would like the tied on look.i would like to learn the knots and such.do you guys have a link where i can see this being done?any help would be greatly appreciated,steve
-
not sure what you mean by knots
i dont use thread,i use sinew
but the process should be the same either way i would think
when i start the rap i fold about a half inch up the shaft so that as i am wrapping i am covering this half inch piece
when i get close to finish with the wrap
i take an extra piece and fold it in half to make a loop
lay that acroos the shaft in the area your wrapping,wrap over it sveral times and finish the wrap
then take the tag ebd of yor thred and put it in that loop
pull that loop bak thru with along with the tag end
then just snip off the excess tag end after te loop comes all the way out
hope this helps
-
thanks sailordad.i said knots,but i didn't mean actual knots.i didn't know how to say what i ment.thanks,you helped alot.i am going to glue them first,i just wasn't sure on how to do the thread.i will give it a try,steve
-
I like this video on Youtube: http://www.youtube.com/watch?v=nxeFvDgXE54 (http://www.youtube.com/watch?v=nxeFvDgXE54). The fletching part doesn't come on until near the end of the video. Hopefully it can help you, or at the very least be entertaining to watch.
-
thanks Matt.i'll check it out,steve
-
hey Matt,i watched the video.thanks a bunch.i like the part where he puts tape on the feathers and cuts his own shape.great info there.thanks again,steve