Primitive Archer
Main Discussion Area => Bows => Topic started by: Frode on January 27, 2011, 08:46:42 pm
-
Hi all,
Back when I got started on all this, I picked up a serving jig. It's plastic, red, OK as these things go, I guess, but it doesn't let me serve strings near as easy as I see done about. It is real hard to keep tension right; it either winds the bow string up tight, or slips and drops on to the table, losing all the wrapping I had up to that point. Usually both. I figure I'm not holding my mouth right, or there's a better tool, or both. I'd be happy to hear your suggestions or recommendations, PM me if it involves branding, please.
As always, your wisdom is greatly appreciated,
Frode
-
Hey Frode I just lock my bow in my vice and serve by hand... It's alot easier for me than trying to use a serving jig. I have about three different ones (one of them home made) and I can't get as good a serving as by hand. Try it and see if it helps to do it that way. :)
-
I use a very poorly made homemade protype that worked so well I never got around to making a proper one. I find it works better than by hand, mostly just because there is always tension on the serving, and I'm faster with it. By hand works good though too.
-
I've used several brands. Ended up with the "Little Spinner" that 3Rivers sells. It works well enough. I liked the "Tornado" also.
-
I've only served a couple strings, and used one that's probably similar to yours Frode. I found that even with the nut at a constant tension, the string tension still changes depending on where it is feeding from the spool. When coming off the center of the spool there's less tension, and then as it reaches the ends of the spool it feeds out harder, I'm guessing because of the sharper angle and increased friction where the serving feeds into the hole on the server. I think it's just inherent to that design.
-
I did my first one by hand, the bloody groove it left in my thumb has since healed and I now have a "little spinner" from 3 rivers.
not that I'm a sissy...just don't like sore thumbs!
-
Sorry to go dark there for a couple of days, guys, business and a big archery event. Thanks for the responses! I've served the majority of mine by hand, because I couldn't keep the tension steady. Every so often I drop the spool about two thirds of the way through, which provokes me to bad language, heh.
I should probably chalk this up to "character development" and keep on practicing.
Though this smacks of a design challenge. Hmmm. I f I build a better "mousetrap", will the world beat a path to my door?
Thanks again, everyone!
Frode
-
Frode, try wrapping one of those fat rubber bands that hold broccoli bunched together around the serving spool to help keep tension and keep the spool from unrollong if you drop it. This was my first serving tool years ago.
-
I just twist in one end of the serving string into the bow string then brace the bow...then I just wrap the rest of the string around a couple fingers and slide it off squeezing it together into a squashed circle. I use B50 string material so its already prewaxed and sticks together.
Or I just wrap it around a 3 inch piece of arrow shaft....doesnt fall or go anywhere...I just unwind as I go.
I proceed to serve by hand with the bow in my lap. No grooves or painful hands.
-
Frode I have used multiple string servers and imo the best one on the market is the Cajun Archery Stringserver it keeps constant tension and is very easy to use and very fast. I purchased mine at Archerys Past for $10.00 as I purchase all of my gear if I dont make it my self, John Strunk told me about this store and the owner Dave Doran is a pleasure to deal with and imo has the best prices around period................. Here is a picture of the server
-
I would double check and see if you have it threaded through the holes properly. It will work more than one way but not hold proper tension as you describe, I think their are little arrows you follow right on the server when threading. Steve
-
Frode, try wrapping one of those fat rubber bands that hold broccoli bunched together ...
I just twist in one end of the serving string into the bow string then brace the bow...then I just wrap the rest of the string around a couple fingers and slide it off squeezing it together into a squashed circle. I use B50 string material so its already prewaxed and sticks together.
Or I just wrap it around a 3 inch piece of arrow shaft....doesnt fall or go anywhere...I just unwind as I go...
Frode I have used multiple string servers and imo the best one on the market is the Cajun Archery Stringserver...
I would double check and see if you have it threaded through the holes properly. It will work more than one way but not hold proper tension as you describe, I think their are little arrows you follow right on the server when threading. Steve
Thanks! I will try all of those, starting with rechecking the path on mine, and on from there.
Frode