Primitive Archer
Main Discussion Area => Bows => Topic started by: knap_123 on January 05, 2011, 10:11:12 am
-
i've not built a bow in awhile cause i kept screiwng up and decided i needed a break. but i felt a calling so hows this look guys? braced at 5"(http://i328.photobucket.com/albums/l338/knap_123/downsized_01041115481-1.jpg) and 50lbs @ 27"(http://i328.photobucket.com/albums/l338/knap_123/downsized_01041115491.jpg)
-
Tough to see full tiller with the complicated background.
-
Tiller looks good.
Looks like the curve on the end of the right limb is bending more than the one on the left limb.
May just be the way the photo looks.
David
-
it might be david, shouald i remove a little off the other or just leave it alone?
-
heres a different angle(http://i328.photobucket.com/albums/l338/knap_123/downsized_0104111552a1.jpg)
-
ok. i did some work but 1 tip seems to pull more than the other. i'm geeting frustrated and its down to 42lbs. shouald i heat in some weight and call it quits or keep playing with it?
-
That looks pretty good, I agree the left limb looks a tad stiffer, but not too bad and if that's the lower limb then that's ok.
I'd probably quit f'now. Shoot it a bit and maybe heat treat it later if you want to tweak it once it's shot in.
Del
-
if it's shooting good, heat it and shoot it, if ya keep trying to make her perfect ya might end up with a kids bow, call it good and shoot it while ya build another
-
thanks, i had to have another go, but this is it(http://i328.photobucket.com/albums/l338/knap_123/downsized_01051111201.jpg)!
-
That's an excellent tiller. Enjoy. Jawge
-
looks good, now go stick something with it