Primitive Archer

Main Discussion Area => Around the Campfire => Topic started by: NOMADIC PIRATE on December 24, 2010, 09:51:44 pm

Title: Some wood working
Post by: NOMADIC PIRATE on December 24, 2010, 09:51:44 pm

I'm slacking on making bows  ::) ::)

But I'm trying to learn to make rifle stocks, didn't know if i was going to pull it out and didn't want to lose too much money in wood so i used Poplar for this one.

Shaping is pretty much done, I'm at 100 grit stage, I will do some serious sanding on this one than stain it and finish, I think it should come out pretty good.

(http://i34.photobucket.com/albums/d124/NorthShoreLB/008-7.jpg)

(http://i34.photobucket.com/albums/d124/NorthShoreLB/007-9.jpg)

(http://i34.photobucket.com/albums/d124/NorthShoreLB/006-9.jpg)

(http://i34.photobucket.com/albums/d124/NorthShoreLB/009-3.jpg)



Thanks for looking

Title: Re: Some wood working
Post by: El Destructo on December 24, 2010, 10:45:21 pm

Sweet Job Manny.....now get started on my Thumbhole Benchrest Stock for my 7mm Weatherby Rifle!!

Title: Re: Some wood working
Post by: mullet on December 25, 2010, 12:30:46 am

Manny, that came out really nice. I've got one started I need to finish, too.

Title: Re: Some wood working
Post by: madcrow on December 26, 2010, 12:45:43 am

I think my 25.06 would look great setting in that one.  Need any measurements?  Great job.

Title: Re: Some wood working
Post by: hillbilly61 on December 26, 2010, 08:14:25 am

drool......drool....drool...dream....drool ;D

Title: Re: Some wood working
Post by: ohma on December 26, 2010, 10:55:25 am

that is lookin great manny,like to see it finished.

Title: Re: Some wood working
Post by: nugget on December 26, 2010, 11:10:38 am

real nice

Title: Re: Some wood working
Post by: Kegan on December 26, 2010, 04:07:31 pm

That's excellent Manny! I can't wait to see one made with your local guava ;)

Title: Re: Some wood working
Post by: JW_Halverson on December 26, 2010, 04:17:49 pm

Ohhh, a snakey guava recurve/decurve thumbhole stock!

Seriously Manny, is there anything you aren't good at?  That is a fine looking piece of woodworking.

Title: Re: Some wood working
Post by: NOMADIC PIRATE on December 27, 2010, 01:18:08 pm

Thanks guys,

I'm sending the action to a tuner for some work, that will give me 2 weeks to slowly sand this baby down, stain it and finish ( If I had the gun here I would probably rush it  :D :D )..and ruin it

Man, I really like woodworking, this was a great excersise and now that i know I can do it I'm already planning to go and get a piece of quality wood and start a new stock ( Poplar doesn't really do it  ;D ;D )

...Back to sanding  ;D ;D ;D

Title: Re: Some wood working
Post by: Keenan on December 27, 2010, 02:08:57 pm

Awesome Manny,  I haven't posted on your high powered air gun thread but I love air guns. Been doing it since a youngster and have gone through a few RWS riffles over the years. Hope to get a more high dollar big bore someday.  Just got our son (Wade) his first air rifle for Christmass. We've been out shooting a little each day. ;D

Very nice work on the stock. How long is your stock?  I have a few pieces of fiddle back maple that are probably big enough for you.  ;)

Title: Re: Some wood working
Post by: NOMADIC PIRATE on December 29, 2010, 01:44:10 am

Thanks Keenan, yeah airguns are a blast.

the stock is probably less than 25" ( don't have a tape mesure at the moment  ::) )
 
it needs to be 8"wide and in slats of max 1" ...you see, I don't have the capability to cut the inletting, so I have to laminate to a degree  ;)


Here's a link of the buildalong

http://www.gatewaytoairguns.org/GTA/index.php/topic,5924.0.html

but if you have something interesting i would be willing to trade something, ....ever made that Guava bow ?

Title: Re: Some wood working
Post by: Keenan on December 29, 2010, 12:15:12 pm

Hey Manny,  I like your buildalong on your stock, very good thinking outside of normal approach.   The pieces that I have are probably 3-4 inches thick and about 8 inches wide, I'll check later today. Could you still use something that thick? I think I may have some thinner (1") pieces of fiddle back.  Would love to get some more guava. Still have to get the one you sent finished but I'm loving the way it works and it sure is strong.
  I've  just been working on trying to finish promised bows that people have been waiting on. So since that bow is a personal bow it's been on the back burner. I'll let you know what I find in my pile.  Also there is a very well supplied exotic wood supply warehouse here in Bend. They often have zebra, bubinga,Cocabola, and just about everything. I could check there if you have a certain preference in mind.

Title: Re: Some wood working
Post by: John K on December 29, 2010, 12:43:56 pm

Nice Manny ! Let me know if you'r interested in some Black Walnut  :)

Title: Re: Some wood working
Post by: NOMADIC PIRATE on December 30, 2010, 12:39:01 am

Allright  ;D ;D ;D ...Wood trading  ;D ;D Keenan I have a good store here too with all those fancy woods, but trading has a special feeling to it  ;D ;D

The next  Stock I'll use a different method, instead of a 3 laminations it will be 2, inlet the action and then glue the 2 pieces, so Keenan ,yeah just a bit more work but 1 to 3 inches is allright, I mesured the stock today and it's 27", but 25 is good enought since I'll cap it.

Yeah John K, 8"x1-3"x25" of Black Walnut would be great.

It's being quite some times I'd gone out Harvesting Guava, I think I'm due  ;D ;D ;D

Title: Re: Some wood working
Post by: John K on December 30, 2010, 09:21:14 am

I'll get some pics up for you this weekend of what i got  :)

Title: Re: Some wood working
Post by: Gary Mac on December 30, 2010, 12:16:53 pm

Oh my, that is such a work of art.
My hats off to you for such a fine piece of work mate!

Title: Re: Some wood working
Post by: NOMADIC PIRATE on January 01, 2011, 02:09:14 pm

Thanks Mr Gary, much appreciated