Primitive Archer

Main Discussion Area => Bows => Topic started by: oneeye on March 28, 2010, 04:39:11 pm

Title: Tiller check @23"
Post by: oneeye on March 28, 2010, 04:39:11 pm

This ones got me confused now.
60" ntn .Top limb is on the left. I'm at 49# @ 23" so still have plenty of room to make 55# @ 28 .  Seems like i need to shave a touch off right mid limb and at the right tip to get it to unfold a bit more. Any suggestions? maybe one of those oval templates. Mark it up I so want to finish this one today. thanks,  Scott

 at brace [(http://i4.photobucket.com/albums/y115/oneye/brace23.jpg)]

at 23" [(http://i4.photobucket.com/albums/y115/oneye/23draw.jpg)]
after shavin it a bit
at 26"[(http://i4.photobucket.com/albums/y115/oneye/26drawbborecurve.jpg)]

Title: Re: Tiller check @23"
Post by: FlintWalker on March 28, 2010, 05:03:49 pm

Top limb looks great. You're right about the bottom though, a little more from just past center out to the tip should do it. ;)

Title: Re: Tiller check @23"
Post by: rattlesnake on March 28, 2010, 06:58:14 pm

looks good im thinking a liitle more mid towards tips... a few scrapes ,, then adjust evenly too positive tiller/weight and your done...snake

Title: Re: Tiller check @23"
Post by: Jesse on March 28, 2010, 11:07:26 pm

Thats gonna be a sweet bow :)