Primitive Archer

Main Discussion Area => Bows => Topic started by: JonW on March 25, 2010, 10:03:05 pm

Title: Newbie Tiller tree Question
Post by: JonW on March 25, 2010, 10:03:05 pm

I just made me a tiller tree and was wondering where I start the measurent for my drawlength marks? Back edge of bow or belly edge of bow?

Title: Re: Newbie Tiller tree Question
Post by: George Tsoukalas on March 25, 2010, 10:15:02 pm

I measure from the back of the handle and since my handles are different thicknesses, I put a strip of tape down and make the markings on it. For the next bow, if the handle is different I peal of the tape and remark it. Jawge

Title: Re: Newbie Tiller tree Question
Post by: hillbilly61 on March 25, 2010, 10:19:32 pm

I like that idea jawge. Mind if I use it? ;D

Title: Re: Newbie Tiller tree Question
Post by: JonW on March 25, 2010, 10:21:21 pm

Thanks Jawge ,very good idea!!

Title: Re: Newbie Tiller tree Question
Post by: George Tsoukalas on March 25, 2010, 10:21:53 pm

Not at all, my friend. Go ahead. Jawge