Primitive Archer
Main Discussion Area => Bows => Topic started by: HoBow on September 29, 2009, 11:45:32 pm
-
This will be one of my next bow projects. I had a customer getting ready to cut down some crepe myrtles, so I went and found the best piece. This one is about 65 inches I believe and four inches our so across. I split it and got two workable staves out of it. This was my last piece after I had split and debarked 3 osage logs and 2 logs of pecan. It is quite amazing how easily the crepe myrtle split and how easy the skin pealed off. I've had more trouble cutting warm butter with a steak knive :). I hope to be able to work one of the pieces within 2 months. I just thought I would share a few pics. The end picture is not that clear. My camera kept fogging on me and I was trying to rush it.
[attachment deleted by admin]
-
Looks like a nice clean stave Jeff :)
-
Jeff,
I will really be interested in how this one turns out. One thing we do have a lot of around here is Crepe Myrtle. I had read old threads about Crepe Myrtle and it looked like it could be used for a bow. After looking at a lot of CM around here, that piece looks a whole lot straighter than what i have seen. I do have a quick question - most of the stuff I have seen seems to grow in a spiral. Did the wood grain in your piece spiral. You said it split easy, so I was wondering. Also, you said you hoped to have done in a couple months. Was this already dead and dry?
Steven
-
Don't get pitch on that nice car ;)
-
I just cut down a whole lot of crepe myrtle. I thought they would be to brittle to make a bow. It doesnt matter, all the crepe myrtle I cut were to thin to even think of getting a stave from.
-
Dana,
It's amazing how clean and straight it was. I'm not use to dealing with wood this nice ;D
Steven,
This is still green, but I am going to give it a month to dry out a little then speed dry it. The grain was arrow straight. Did you split it green and it was already spiraled or did it spiral as it dried?
Kent,
Mullet told me to keep it wide and flat on the belly. He reminded me that Timo made a warbow out of it...I think it was around 80 lbs, but I can't quite remember. I'm shooting for a lot less, so I guess I will find out.
OldBow- Is pitch from crepe myrtle worse than other trees- it did seam to have quite a bit.
-
Not Timo but Thimo! He was making heavy bows with crepe myrtle. I was surprised. To me, it always looked to straight to make a good bow! ;D
-
Jeff, I haven't actually cut any. I was just looking at the trees and on every one I looked at, it looked like the trunk and limbs had a spiral growth. I could see the bark sort of twist or spiral and you went up the trunk. You piece just looked a whole lot straighter than what I have been looking at.