Primitive Archer

Main Discussion Area => Bows => Topic started by: kiltedcelt on May 07, 2009, 12:40:36 pm

Title: ELB wood choice
Post by: kiltedcelt on May 07, 2009, 12:40:36 pm
I'm looking to make an ELB - weight about 50# - draw length around 31" - Obviously Ipe seems to be the first choice, backed by bamboo. I'm assuming if I make the Ipe belly thin enough it won't end up drawing a bazillion pounds. Does anyone back these with hickory or is it always bamboo? Is there a non-yew or osage wood to use that could make a "D" cross section ELB that wouldn't need a backing, in the weight I want?
Title: Re: ELB wood choice
Post by: Ryano on May 07, 2009, 02:02:54 pm
Most any of the white woods like hickory, maple, elm, hhb, and a plethora of others can make a round belly elb at that draw weight/length...the key here is to make it slightly longer than with yew or osage.
Title: Re: ELB wood choice
Post by: Hillbilly on May 07, 2009, 02:05:36 pm
I think mulberry is the best yew substitute for an unbacked ELB. Leave a couple rings of sapwood. As Ryan said, many woods will work if made longer/flatter.
Title: Re: ELB wood choice
Post by: kiltedcelt on May 07, 2009, 02:31:45 pm
I guess I should clarify that I want to stick with boards versus staves because I don't really have access to staves unless I buy them and I don't know if I can justify a minimum of $50 for a stave since I don't have a whole lot of bows under my belt yet. I can buy Ipe locally or for that matter many other types of hardwood lumber. I think a laminate of two woods would probably be my best option and most forgiving to slight mistakes I might make.
Title: Re: ELB wood choice
Post by: Stonedog on May 07, 2009, 02:44:16 pm
I like hickory backed ipe........
Title: Re: ELB wood choice
Post by: woodsrunner on May 07, 2009, 03:04:57 pm
You can make an unbacked ELB with Elm, Ash, or Walnut. I have even seen a white oak in the ELB style. I think you could back ipe in hickory, maybe not with as much success but it should work.
Title: Re: ELB wood choice
Post by: woodsrunner on May 07, 2009, 03:12:22 pm
Sorry thats what I get for not reading the entire thread. Didn't see the post on board vs staves. But you might try contacting your cities forrestry service. I know forrestry in the city? I live in Kansas and we have a forrestry dept. they take care of the tree trimming on city right of way. Most places, not all but most have Elm and they get cut out often, see if they would contact you when cutting a tree out and you could get some staves from them. I have scored some Elm and Hackberry from the dept. here.