Primitive Archer
Main Discussion Area => Bows => Topic started by: Far East Archer on April 22, 2009, 06:35:52 am
-
Haro,
Ok, well this is one of several bow I make now. These are made from very good wood supplied by Richard, grain was quite straight and clear, easy to plane. Thank you for the really nice wood!Also, density was quite nice as I never use this dense wood as bow, only small items. I am really surprise by its stiffness and compressive strength, very nice wood indeed.I think its a bit heavy, but thats from the extra length I give it~the draw is smooth for that and it seems accurate. I ended with about 50#@26", though it easy can pull to 28". It seems to shoot quite flat out to 65 meters, 100 yards easily with maybe 25 degree angle shot.
Bamboo back is 3 mm thick, ebony tip overlay and accent in handle.
179 cm long and little over 29 mm wide at handle. Tips are 11 mm wide.
It has 1 inch reflex at rest, glued in 1.5" so I guess not bad~belly is round. maybe straight after long shooting, but it always return to 1" reflex...
Oh, finish is shellac from China, it seems quite good quality, I use 4 coats with wet sanding inbetween of 2000 grit.....maybe needs more coatings.
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1604.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1605.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1483.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1487.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1496.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1482.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1498.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1515.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1500.jpg)
(http://i73.photobucket.com/albums/i227/paleoalex/DSC_1546.jpg)
-
A beautiful bow. The wood is stunning, and I really like the finish you put on it.
Dane
-
Beautiful work,I love the finish work.Good job. :) Tips and grip are gorgeous. :)
Pappy
-
I like this bow a whole bunch, it has deadly look to me and the tiller looks great also, well done :)
-
Quality work! Top shelf stuff, I like it alot.
-
YES ... good one ;D
Be proud of that bow its a nice one ... mmmmm ...yummie
I have a weak spot for long bows ::)
Chris ... ;)
-
You did an excellent job on that bow
-
Looks great. Seems a little stiff in the near handle section but maybe you wanted it that way? Excellent finish work.
-
nice bow fea,looks like it will shoot good..great job
-
This is a dandy. Love the slim trim handle. Bookmarked, too, for April Laminated BOM.
-
Thank everyone for nice comments!
Ryan,
Yes, I think if to to make it pull to 28 maybe I would have made it bend more in area you mention as it is slight stiff indeed.
Its quite long so, only drawing 26 I think maybe its ok this way, good eyes!
-
very nicely done.