Primitive Archer
Main Discussion Area => Bows => Topic started by: TheWildCat on January 03, 2009, 11:39:54 am
-
Holmegaard Bow
I know some of y'all have had some experience in buildin the Holmegaard bow. So I got a question. I have read as much as I can bout the original, and different opinions of the design. I have looked at the pictures of the orignal, or what I believe is the original (http://www.archerymuseum.org/holm.htm). When I look at this picture and the light reflections on it, I notice what appears to me to be a Concave grove along the bows length, all the way out to the tip. I don't know in fact ifin this is the Back of the bow or the Belly? If it is a concave groove, I have read nothin about it or if it would affect the bows tiller. I believe it is the Belly of the bow. I think it must affect the tiller. Am I mis-interpretin this picture? Would a groove affect the tiller? Please look at the picture and give me your opinions!!!
TheWildCat :-\
-
The groove seem to be centered down the bow. Could it be where an early growth ring was but deteriorated or separated in the bog? Just a thought. ??? Pat
-
Guess I don't see what you are talking about but thanks for posting the link. Kenneth
-
That is very possible Pat. Didn't think bout that one. I sure would like to get a good close look at that rascal!!!
TheWildCat
-
If I'm not mistaking the ones found were made with the pith of early wood split as the back. That would explain the center grove. I'm no historian but I read that somewhere but never tried it. ;D