« previous next »
Pages: [1]

Author Topic: heat gun temp. settings?  (Read 2833 times)

0 Members and 1 Guest are viewing this topic.

Offline brownhillboy

  • Member
  • Posts: 577
heat gun temp. settings?
« on: November 03, 2008, 02:00:47 pm »
What temperature settings do you guys prefer for different jobs such as heat treating and bending?  And do you use different temps. for different woods?  Thanks.
P.S.  I don't have TBB4 yet.
Logged
south central VA

Offline snedeker

  • Member
  • Posts: 907
Re: heat gun temp. settings?
« Reply #1 on: November 03, 2008, 02:17:51 pm »
I use mine on the highest setting, which is 1100 I think, allways.

Dave
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: heat gun temp. settings?
« Reply #2 on: November 03, 2008, 02:22:10 pm »
I'm like Dave and use it on the highest setting. I believe mine is 1200w.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: heat gun temp. settings?
« Reply #3 on: November 03, 2008, 03:31:19 pm »
Me too!
Logged
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline DanaM

  • Member
  • Posts: 9,211
Re: heat gun temp. settings?
« Reply #4 on: November 03, 2008, 03:37:05 pm »
Actually if I have a real bad spot I will start out on lower temp sorta like preheating the oven then ramp the heat to the highest setting.
I feel this gives the heat a chance to penetrate the wood without scorching.
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline brownhillboy

  • Member
  • Posts: 577
Re: heat gun temp. settings?
« Reply #5 on: November 03, 2008, 04:04:41 pm »
Thanks guys.  That's what I wanted to know.
Logged
south central VA

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: heat gun temp. settings?
« Reply #6 on: November 03, 2008, 05:09:40 pm »
Usually high, but I sometimes do as Dana said if the wood is thick. You can easily regulate the temp anyway by how far from the wood you hold the gun.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: heat gun temp. settings?
« Reply #7 on: November 03, 2008, 05:58:05 pm »
High..... If I want to heat slower I move it faster up and down the limb faster.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: heat gun temp. settings?
« Reply #8 on: November 03, 2008, 07:07:58 pm »
Put a little veg. oil on the surface to be heated. It will protect the wood and more evenly distribute the heat.
Logged
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill
Pages: [1]
« previous next »