« previous next »
Pages: [1]

Author Topic: bending bbo  (Read 2893 times)

0 Members and 1 Guest are viewing this topic.

Offline possum

  • Member
  • Posts: 163
bending bbo
« on: September 25, 2008, 03:40:29 pm »
I have a bamboo backed osage stave I'm beginning to tiller.  It has a good reflex but one limb doesn't match the other toward the tip. About 8-10" from the tip it deflexes slightly.  Is it safe to heat and bend it to match the other limb?  And if it is should I use a heat gun or steam?  It is glued on with TBII.

possum
Logged
"To ensure peace, security, and happiness, the rifle and pistol are equally indispensable. The very atmosphere of firearms everywhere restrains evil interference - they deserve a place of honor with all that is good." George Washington


mebane NC

Offline longfletch

  • Member
  • Posts: 37
Re: bending bbo
« Reply #1 on: September 25, 2008, 03:52:17 pm »
if i remember correctly, TB glues at around 150 degrees will fail, so i dont think its a good idea
bryan
Logged
i like poetry, long walks and the beach and poking dead things with a stick

Offline adb

  • Member
  • Posts: 5,339
Re: bending bbo
« Reply #2 on: September 25, 2008, 05:02:56 pm »
I wouldn't try to heat bend a glue-up either, especially TB II. I think TB III might be OK. Do you think you could just tiller around it? Send us a pic if you can. Here's a yew selfbow I just tillered with a big deflex bend in the bottom mid limb. Maybe you can work around it?

[attachment deleted by admin]
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: bending bbo
« Reply #3 on: September 25, 2008, 06:53:27 pm »
nope  tbIII  will not be ok, it will let loose at 150 degrees also

i know for  fact as i hve done it on purpose to get glued wood apart


                                                                  tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline adb

  • Member
  • Posts: 5,339
Re: bending bbo
« Reply #4 on: September 26, 2008, 02:18:59 am »
Thanks, sailor. I thought so, but I wasn't sure. My philosophy... after she's glued, no heat bending.
Logged

Offline deerhunter97370

  • Member
  • Posts: 374
Re: bending bbo
« Reply #5 on: September 26, 2008, 03:41:07 am »
You can delaminate the boo off the belly, heat bend the belly then glue the boo back on. Joel
Logged
Always be ready to: Preach, Pray, or Die. John Wesley
Pages: [1]
« previous next »