« previous next »
Pages: [1]

Author Topic: making a warbow  (Read 5895 times)

0 Members and 1 Guest are viewing this topic.

growler1

  • Guest
making a warbow
« on: September 02, 2008, 02:23:27 pm »
I'm hoping to make a full compass bow soon, and I'm unaware of what wood to go with. I have read plenty of info on how to make bows, I just cant decide wether to make a self bow from Ash, or a doublle laminate bow.

Cheers
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: making a warbow
« Reply #1 on: September 02, 2008, 04:23:52 pm »
If I was yew...
Logged

triton

  • Guest
Re: making a warbow
« Reply #2 on: September 10, 2008, 10:44:07 am »
wych elm wood yew choose?
Logged

Bowbound

  • Guest
Re: making a warbow
« Reply #3 on: September 19, 2008, 05:22:30 pm »
Whatever you want! The self ash is more likely to break but you wouldn't waste any resources and the double laminate is the opposite. If you went for a double laminate i would probably use Ipe for the belly and bamboo or hickory for the back as i have seen these woods work well in a warbow. The Ipe is poisonous though so be careful using it and make sure you wear a dustmask.

If money wasn't a case definitely the double laminate, if it was then get experience on ash first.
Logged

Offline markinengland

  • Member
  • Posts: 698
Re: making a warbow
« Reply #4 on: September 19, 2008, 06:05:22 pm »
Any bow wood will make a full compass bow. The draw weight, length and width may need altering to suit the piece of wood.
Ash or Elm would do the job, so would hickory. Find something that is reasonably good but not too expensive to ruin and have a go. All you need to do is get an even bend all along and you are finished!
Mark in England
Logged
Pages: [1]
« previous next »