Author Topic: A collection of various Bows and one in the making. (Read 10177 times)

ThimoS · « **on:** July 28, 2008, 08:17:02 pm »

First two pics are a brand new elm staff I procured today. Should make a dandy of a warbow.

Next is a replica of one of the Nydam bows. Followed by one I made out of dense erc.

ThimoS · « **Reply #1 on:** July 28, 2008, 08:26:21 pm »

YewArcher · « **Reply #2 on:** July 28, 2008, 10:04:11 pm »

Nice bows Thimo! That ERC looks just wicked! I am on the hunt for some but cannot locate any

When I do i will war bow it for sure. What weight did you get out of it?

SJM

Marc St Louis · « **Reply #3 on:** July 28, 2008, 10:06:33 pm »

Very nice Thimo. What is the draw weight on that ERC bow? It is very well tillered

ThimoS · « **Reply #4 on:** July 28, 2008, 10:09:19 pm »

Thanks guys.

It has gone down now (from extensive shooting) too 85#. It was nearly 100#.

Marc St Louis · « **Reply #5 on:** July 28, 2008, 10:13:19 pm »

That was good ERC. I made one for Marlon a couple years ago that was massive, fully 1 3/4" wide at the center yet I don't think it pulled 120# @ 32"

cowboy · « **Reply #6 on:** July 28, 2008, 10:14:58 pm »

Great looking warbow Thimo! - that full draw shot looks like it hurt a little, I'd hate to be on the recieving end

.

ThimoS · « **Reply #7 on:** July 29, 2008, 03:19:08 pm »

Thanks guys.

That "war-face" comes out when I'm concerned about the "integrity" of a bows back. The erc was riddled in knots and I made more than a few hasty mistakes while debarking. LOL

medicinewheel · « **Reply #8 on:** July 29, 2008, 05:42:37 pm »

thimo! that erc bow is really beautiful!! ...well i like the others, too...but the erc is special!

frank

The Burnt Hill Archer · « **Reply #9 on:** July 29, 2008, 08:14:58 pm »

yup that erc was and still is my favorite bow youve made. im looking forward to the newest elm...

Phil

ThimoS · « **Reply #10 on:** July 29, 2008, 08:43:41 pm »

Thanks.

Well I went and reduced the limbs on the elm while still green, down to 1/4" of the final specs. Now I'll let it dry a bit.

ThimoS · « **Reply #11 on:** July 29, 2008, 08:47:56 pm »

I'm not as rash as it may sound. I first cut a section and worked it down into a small sample of the cross-section. Oven dried it last night and tested it's density, which came in at the high .70's. The trees that grow here near the Great-Dismal swamp seem to always come out denser that the same trees taken in other surrounding forests.

Badger · « **Reply #12 on:** July 30, 2008, 03:57:26 pm »

I like the tiller on the erc, you really got those outside limbs working nicely. Steve

Stonedog · « **Reply #13 on:** July 31, 2008, 09:36:17 am »

Thimo-

Seriously man, you are an inspiration!

Also, it is good to see someone who has a shop as messy an mine!

predatorcaller · « **Reply #14 on:** July 31, 2008, 05:01:12 pm »

nice bows sir!

Primitive Archer

Author Topic: A collection of various Bows and one in the making. (Read 10177 times)

ThimoS

A collection of various Bows and one in the making.

ThimoS

Re: A collection of various Bows and one in the making.

YewArcher

Re: A collection of various Bows and one in the making.

Marc St Louis

Re: A collection of various Bows and one in the making.

ThimoS

Re: A collection of various Bows and one in the making.

Marc St Louis

Re: A collection of various Bows and one in the making.

cowboy

Re: A collection of various Bows and one in the making.

ThimoS

Re: A collection of various Bows and one in the making.

medicinewheel

Re: A collection of various Bows and one in the making.

The Burnt Hill Archer

Re: A collection of various Bows and one in the making.

ThimoS

Re: A collection of various Bows and one in the making.

ThimoS

Re: A collection of various Bows and one in the making.

Badger

Re: A collection of various Bows and one in the making.

Stonedog

Re: A collection of various Bows and one in the making.

predatorcaller

Re: A collection of various Bows and one in the making.