Author Topic: Egyptian composite build a-long  (Read 95050 times)

0 Members and 1 Guest are viewing this topic.

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #90 on: August 22, 2008, 11:46:25 pm »
Yeah it is thick , like the originals, almost as thick as it is wide . It doesn't have as much reflex as the bow I'm copying and it's not as thick either ... It's looking like old bows were kinda heavy draw weight bows. I won't full draw it till I fully wrap the handle .


Ralph

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
Re: Egyptian composite build a-long
« Reply #91 on: August 23, 2008, 09:22:25 am »
have you drawn it at all yet, or just floor tillering?
stalk softly, and carry a bent stick.

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #92 on: August 23, 2008, 11:14:28 am »
I've bent it ,handle on my knee ,and pulling both tips ,6 or 7 inches .That was far enough to see the pyramid shape start to form .I had to scrape the horn on the end of one limb just a bit ,because it wasn't unrolling like the other one.

Ralph 

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #93 on: September 08, 2008, 03:05:00 pm »
Getting very close to stringing ,,, finally. Thanks for all the help so far guys .
Here is the handle section fully sinew wrapped.



And the nocks are roughly shaped for the first stringing.. Do ya'll think I got shape about right?





In this last picture ,you can see the string groove in the horn the old bows had it too.




Ralph

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #94 on: September 09, 2008, 10:51:29 am »
I took a walk along the river this morning ,and look what I found . I've never covered a whole back with bark ,any tips or ideas?



Ralph


Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Egyptian composite build a-long
« Reply #95 on: September 09, 2008, 01:42:06 pm »
Ralph, What kind of bark is it. Some barks are too brittle when dried and if the bark cracks there is a chance the bow will also.  Birch bark or cherry bark is what I would use. I believe birch bark is a traditional backing over the sinew on some Asian bows.     Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Papa Matt

  • Guest
Re: Egyptian composite build a-long
« Reply #96 on: September 09, 2008, 02:33:38 pm »
That there looks like Sycamore.

~~Matt

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #97 on: September 09, 2008, 02:51:29 pm »
Yep Matt that's what it is .Does anybody have any idea if it will work .

Ralph

Papa Matt

  • Guest
Re: Egyptian composite build a-long
« Reply #98 on: September 09, 2008, 03:08:16 pm »
Brother, I've never bark-backed a bow, but I grew up with sycamore trees all around the house, and played with the bark and even made kid bows out of the limbs. I doubt that sycamore bark will work cause it likes to crack and crumble like a cracker when it's dry. I wouldn't mess with it.

~~Matt

alfadee

  • Guest
Re: Egyptian composite build a-long
« Reply #99 on: September 09, 2008, 03:38:37 pm »
i think matt is right.
you need elastic bark to back a bow with and i think the bark you can use for always grows horizontally on the tree.

david

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Egyptian composite build a-long
« Reply #100 on: September 09, 2008, 03:41:27 pm »
I thought it looked like sycamore also. It is too crumbly for backing. Canoe birch or choke cherry would be your best bet.        Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #101 on: September 10, 2008, 06:27:02 pm »
Thanks guys I'll keep lookin'

Ralph

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Egyptian composite build a-long
« Reply #102 on: September 11, 2008, 03:39:43 pm »
Ralph, I may have a few strips of birch bark you are welcome to. How long do you need.     Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #103 on: September 12, 2008, 10:09:01 pm »
Thanks Pat, it's 52" long ,but Eddie is already sending me some . What a great bunch.

Ralph

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Egyptian composite build a-long
« Reply #104 on: September 12, 2008, 10:32:50 pm »
 Ralph, I'll box it tomorrow.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?