Author Topic: Egyptian composite build a-long  (Read 95034 times)

0 Members and 1 Guest are viewing this topic.

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #15 on: June 29, 2008, 08:36:20 pm »
Worked on the core , got the nocks raised ,



And the overall thickness thinned so it reverse tillers a bit .Now I can glue the horns on with reflex.
Here it is relaxed .



And bent backwards .




Ralph

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Egyptian composite build a-long
« Reply #16 on: June 30, 2008, 12:10:18 am »
Iam following this with interest.Thx fer doin' it Ralph.....bob

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #17 on: June 30, 2008, 03:26:48 pm »
Glad you like it so far Bob. Not sure if I told ya , but I took your advice and smoked the 3 pieces of wood after deflexing them. That is just before glueing them together .

Ralph

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Egyptian composite build a-long
« Reply #18 on: July 01, 2008, 08:09:57 am »
Ralph, very interesting project, and a wicked-looking bow design. I'll be munching popcorn and waiting for the next episode. :)
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
Re: Egyptian composite build a-long
« Reply #19 on: July 01, 2008, 06:47:12 pm »
looks like its comming allong nicely...this is so far above my relm of bow makin, and very cool!!! thanks for takin the time to record it all.

Phil
stalk softly, and carry a bent stick.

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #20 on: July 01, 2008, 08:05:28 pm »
Ummm popcorn .     ;D

Phil I'm sure if I can do it , you can too.

Today I radiused over the back ,sinew side of the core .I will round over the belly (horn side ) after attaching the horn.



In this next photo you can see the red oak handle piece I added ,and the grain following the deflex in the handle.



To bad that will all be covered up .

I also started sizing the horn with thinned hide glue .A couple of these pieces didn't soak in the milk ,and they are reacting to the glue differently.



I will keep applying thin coats of glue and letting them dry until the horns don't absorb it any more and I  have a thin coat of glue on the surface of the horns .

Ralph

radius

  • Guest
Re: Egyptian composite build a-long
« Reply #21 on: July 02, 2008, 11:13:33 pm »
so, after a month of milk, are the pieces of horn...flexible?  soft?  or what?

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #22 on: July 03, 2008, 01:35:41 pm »
Both , pretty much just like boiled horns .But boiled horns get stiff quickly as they cool. The soaked horns get stiff as they dry.   And as mentioned earlier , if you heat the soaked horn a bit (in the milk or hide glue) it gets even more flexible .You can hold one end and it will flop over like a wet noodle.

The previously soaked horns, when I sized them with thin hide glue , soaked it right in .And the horns that were just sanded flat the glue kinda sat on the surface for a while ,it took three wettings with thin glue for it to seep in . You can see it in the above picture , The top and the third from the top horn strips are strips of horn that were soaked in milk .Notice how smooth and evenly wet they look . The other two horn strips in the picture are just sanded . If you look you can see puddling and dry spots ,were the wet glue has already pooled around like water on a counter top.

   I didn't have any boiled horn to try this time . Horn doesn't like to be glued . But I think the process of soaking them helps in this regard .

Ralph
« Last Edit: July 03, 2008, 01:43:50 pm by welch2 »

Offline Knocker

  • Member
  • Posts: 271
  • Tumwater, Washington
Re: Egyptian composite build a-long
« Reply #23 on: July 03, 2008, 04:49:31 pm »
Thanks for demonstrating this Ralph.  How tough is it to find the horn?  Expensive?

Keith
If ye love wealth better than liberty, the tranquility of servitude
better than the animating contest of freedom, go home from
us in peace. We ask not your counsels or arms. Crouch down
and lick the hands which feed you. May your chains set
lightly upon you, and may posterity forget ...

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #24 on: July 03, 2008, 05:32:34 pm »
Keith , Gemsbok or orynx  horn is relatively easy to find online and inexpensive . Around $20 each . You need to find horns that are straight in at least one plane ,and about 10" longer than you need. After sawing it in two ,you will have two pieces enough for one bow. The tips are very narrow so you loose some there ,and the bases are thin and brittle ,some loss there too. 

Ok , this morning I sized the core ,took 2 coats .I also fixed a small spot where the glue joint between hickory and lemonwood was wider than everywhere else . I wet the spot ,heated it with a hair dryer .Then applied more glue and clamped it.




Ralph

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Egyptian composite build a-long
« Reply #25 on: July 03, 2008, 06:18:43 pm »
 Ralph, when you are soaking the horns, do you change the milk, soak it in a refrigerator, or just not worry about it spoiling?
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #26 on: July 03, 2008, 10:11:27 pm »
I just covered it to keep bugs out and let it spoil . The horns were in the bottom completed covered in a thick coat of curds when I pulled them out. This was my first time using milk . I normally use hide glue ,and I end up changing it a few times .But with milk it was a guess on my part that curds may be worth saving .

Ralph

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Egyptian composite build a-long
« Reply #27 on: July 03, 2008, 11:51:34 pm »
  Cool, I've got the strips cut. Don't let me slow you down. This is interesting.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Egyptian composite build a-long
« Reply #28 on: July 05, 2008, 07:45:54 pm »
I am slow you may just pass me up . ;D  Mullet have you took any pictures ?

Ralph

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Egyptian composite build a-long
« Reply #29 on: July 05, 2008, 10:50:27 pm »
  No, all I've done is cut the horn.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?