Author Topic: Wood ID For Bow  (Read 1522 times)

0 Members and 1 Guest are viewing this topic.

Phillip King

  • Guest
Wood ID For Bow
« on: January 02, 2023, 11:00:50 pm »
Got another Challenge. I was given these 4" Branches Of what I was told was Walnut  But Im Not Positive, Ive never seen Walnut with a yellow stain under the Bark.
I would Like to make some sinew Backed Bows with this wood, It is pretty Dence and Have long fibers. The Longest Staves are at least 50 Inches long but will have a crown. Up Date- It is white walnut
« Last Edit: March 02, 2023, 05:33:38 pm by Phillip King »

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wood ID For Bow
« Reply #1 on: January 02, 2023, 11:23:25 pm »
That might be white walnut(butternut) but it isn't black walnut because it doesn't have the dark heartwood. As far as bow wood, I don't know. Give it a try and report back.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Phillip King

  • Guest
Re: Wood ID For Bow
« Reply #2 on: January 03, 2023, 02:24:21 pm »
 Will do  (-S

Phillip King

  • Guest
Re: Wood ID For Bow
« Reply #3 on: January 03, 2023, 02:30:02 pm »
THANKS Pat, I remember your wisdom from the early 2000s

Offline TimBo

  • Member
  • Posts: 1,047
Re: Wood ID For Bow
« Reply #4 on: January 03, 2023, 05:22:35 pm »
Pat's wisdom should be even better by now!  With such an unknown wood though, I personally would not go to all of the trouble of sinewing it without trying a non-backed bow first to get an idea of its qualities.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wood ID For Bow
« Reply #5 on: January 03, 2023, 06:36:11 pm »
I'd suggest an overbuilt selfbow first to see how the wood performs.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Aaron1726

  • Member
  • Posts: 224
Re: Wood ID For Bow
« Reply #6 on: January 03, 2023, 07:56:34 pm »
TBB also suggests making a small scale bow first.  Something you can make quickly and easily to see how the wood bends.  If you have several pieces, could try it on a smaller one.

Offline superdav95

  • Member
  • Posts: 2,116
  • 3432614095
Re: Wood ID For Bow
« Reply #7 on: January 04, 2023, 12:04:09 am »
The bark sorta looks like elm.  If it split’s terribly then it might be elm.  Elm has interwoven grain with each layer of growth.  Is the bark softer to the touch and easy to break off some of its sections? 
Sticks and stones and other poky stabby things.

superdav95@gmail.com

Offline bassman211

  • Member
  • Posts: 597
Re: Wood ID For Bow
« Reply #8 on: January 04, 2023, 05:51:32 am »
Walnut . Make it wider, and longer.

Phillip King

  • Guest
Re: Wood ID For Bow
« Reply #9 on: January 07, 2023, 09:10:15 pm »
I will try a self Bow With Rawhide, Thank yous (S)

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Wood ID For Bow
« Reply #10 on: January 08, 2023, 04:42:10 pm »
The bark sorta looks like elm.  If it split’s terribly then it might be elm.  Elm has interwoven grain with each layer of growth.  Is the bark softer to the touch and easy to break off some of its sections?

I agree, that's a pretty "elmy" looking bark. Some elms make great bows!

If you can find a couple twigs showing leaf scars or buds, try running that past your local county extension agent. And if you can find some leaves from the tree, take those along.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wood ID For Bow
« Reply #11 on: January 08, 2023, 06:30:12 pm »
Like Dave said, if it's hard to split it's elm. If it splits easy I still think Butternut.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC