Author Topic: Earlywood latewood mix?  (Read 2342 times)

0 Members and 1 Guest are viewing this topic.

gutpile

  • Guest
Re: Earlywood latewood mix?
« Reply #15 on: April 13, 2022, 03:45:38 pm »
cedar is a bear to chase too.. but I have done it before.. slow and I mean slow ... good luck ..a dull drawknife is best.. gut

Offline Deerhunter21

  • Member
  • Posts: 2,262
  • What do you despise? By this are you truly known.
Re: Earlywood latewood mix?
« Reply #16 on: April 13, 2022, 05:01:59 pm »
Thanks Ryan, thanks gut! It’s a slow and steady process… a couple inches every day!

So how do you guys deal with knots when chasing a ring??
Life before death. Strength before weakness. Journey before destination.

Offline Deerhunter21

  • Member
  • Posts: 2,262
  • What do you despise? By this are you truly known.
Re: Earlywood latewood mix?
« Reply #17 on: April 13, 2022, 05:14:28 pm »
I’m now approaching the really hard part
Life before death. Strength before weakness. Journey before destination.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Earlywood latewood mix?
« Reply #18 on: April 14, 2022, 10:21:34 am »
Russell, when I'm chasing a ring and come to a knot I leave a small island of the ring around the knot until I've finished the rest of the back. I then come back and tackle each knot by starting along the top of the knot and scrape down around the knot removing that island. If you try to go up the knot from the back you could get tear outs violating the ring below.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC